Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
ART ProChannel II - Channel Strip
EAN: 840402019312
The Pro Channel II from ART is a channel strip featuring a second-generation discrete Class-Amicrophone preamp, followed by a compressor and a 4-band semi parametric EQ section. The electronics of the preamp provide clean quiet gain while maintaining transparency. Analog and LED meters provide a detailed indication of audio levels.
The compressor is able to subtly control transients and noise on the most demanding sources, while the EQ offers wide tune-ability, and can be patched before or after the dynamics processor. Separate rear panel insert points allow patching in external signal processors immediately after the microphone preamp, and before the EQ and dynamics processor.
Variable input impedance for flexible microphone voicing
Selectable plate voltage
Large VU meters
Backlit function switches
Discrete Class-Ainput microphone preamplifier
Low noise at lower gain settings
Extremely low Total Harmonic Distortion (THD)
Wide frequency response
Additional front mounted instrument input jack
Supports Mid/Side mic ing technique
Operates at +4 dBm/-10 dBv output
Selectable stereo/dual operation of output controls
Automatic instrument input selection
EAN: 840402019312
The Pro Channel II from ART is a channel strip featuring a second-generation discrete Class-Amicrophone preamp, followed by a compressor and a 4-band semi parametric EQ section. The electronics of the preamp provide clean quiet gain while maintaining transparency. Analog and LED meters provide a detailed indication of audio levels.
The compressor is able to subtly control transients and noise on the most demanding sources, while the EQ offers wide tune-ability, and can be patched before or after the dynamics processor. Separate rear panel insert points allow patching in external signal processors immediately after the microphone preamp, and before the EQ and dynamics processor.
Variable input impedance for flexible microphone voicing
Selectable plate voltage
Large VU meters
Backlit function switches
Discrete Class-Ainput microphone preamplifier
Low noise at lower gain settings
Extremely low Total Harmonic Distortion (THD)
Wide frequency response
Additional front mounted instrument input jack
Supports Mid/Side mic ing technique
Operates at +4 dBm/-10 dBv output
Selectable stereo/dual operation of output controls
Automatic instrument input selection
ART ProChannel II Specs
| Number of Channels | Single |
| Inputs | 1 x 1/4" TS phone Instrument (front panel) 1 x XLR Microphone 1 x 1/4" TS phone Comp In (return) 1 x 1/4" TS phone EQ In (return) |
| Outputs | 1 x XLR 1 x 1/4" TRS phone |
| Frequency Response | 12 Hz to 100 kHz, +0,-1.0 dB |
| THD | 1 kHz: < .015% typical 20 Hz to 20 kHz: < .033% typical |
| Noise | EIN Mic/Line: -128 dBu, input shorted, maximum gain, A-weighted Instrument: -109 dBu, input shorted, maximum gain, A-weighted |
| Preamp | |
| Gain Range | Microphone: 70 dB (XLR to balanced output) Instrument: 64 dB (1/4" to balanced output) |
| Input Impedance | Microphone: 150 to 3.4k©, variable Instrument: 2.5M© Preamp Insert: 7. 5k© |
| Maximum Input | Microphone: +18 dBu balanced Instrument: +15 dBu |
| Output Impedance | Balanced Output: 600© balanced Unbalanced Output: 300© Insert Outputs: 300© |
| Maximum Output | Balanced: +24 dBu Unbalanced: +20 dBu Output Level @ Meter 0 VU:+4 dBu/-10 dBV |
| Phantom Power | +48 V |
| Compressor | |
| Threshold Range | -20 dB to +20 dB |
| Ratio | 2:1 to 30:1 |
| Attack Time | 250 µs to 100 ms |
| Release Time | 100 ms to 3 s |
| Sidechain | No |
| Equalizer | |
| Frequency Bands | Low: 40/120 Hz, selectable Low-Mid: 20 Hz to 2 kHz, continuously variable High-Mid: 200 Hz to 20 kHz, continuously variable High: 6 kHz/18 kHz, selectable |
| Bandwidth | Low- and High-Mid can be switched to Wide or Narrow |
| Range (Boost/Cut) | +/-12 dB on each band |
| Physical | |
| Power Requirements | 105~125 VAC, 60 Hz |
| Dimensions | 19 x 9.2 x 3.5" (483 x 234 x 89 mm) |
| Weight | 11 lb (5 kg) |
| Specialties | Low-Cut Filter: 10 Hz to 250 Hz, 1-pole, 6 dB/octave |
Packaging Info
| Package Weight | 13.5 lb |
| Box Dimensions (LxWxH) | 21.9 x 11.2 x 5.4" |
In the Box
- ART ProChannel II - Channel Strip
- AC Power Cable
- 3-Year Manufacturer Warranty
No posts found
