EAN: 676101036776
The Pro48 from Radial Engineering is a high-performance, active direct box designed specifically for guitars and bass with active pickups that produce considerably higher output. It exhibits excellent headroom and dynamics.
Utilizing 48V phantom power from a mixing console, the unit employs an innovative digital switching power supply that significantly increases headroom and allows for less distortion while yielding a smooth, linear response.
This makes the Pro48 an ideal candidate for use with battery-powered active basses and acoustic guitars that tend to overload direct boxes. An input pad helps prevent overload from hot signals and a ground-lift switch is provided to reduce noise caused by ground loops.
The Pro48 is constructed using 14 gauge steel with Radial s unique book-end design that provides protective zones around the switches and connectors. The internal welded I-beam construction assures outside stress will not torque the PC board.
High-resolution active direct box
48V phantom powered with digital switching
Excellent headroom and dynamic range with low noise floor
Ground-lift switch, when activated helps to reduce hum and buzz caused by ground loops
Pad switch engages a -15 dB pad to reduce the input level and prevent overload from high-output devices like CD players and active pickups
Connectors are 100% electrically isolated from the chassis
Inner steel enclosure is made extremely rigid with an I-beam profile, eliminating any stress that could torque the PC board and cause solder joint failure
Military-grade, double-sided PCB is bolted to steel standoffs for road-toughconstruction
For live situations the neoprene foam foot provides electrical isolationand plenty of friction to stay put
Radial Engineering Pro48 Specs
Input & Output | 1 x 1/4" TS, Input 1 x 1/4"TS, Thru 1 x XLR 3-Pin, Balanced Output |
Input Level | +9 dBu |
Output Level | Not Specified by Manufacturer |
Impedance | Input: 220 Kilohms Output: 600 Ohms (XLR Output) |
THD | 0.001% at 0 dB |
Intermodulation Distortion | 0.002% at 0 dBu |
Phase Deviation | +28° at 20 Hz, 1° at 1 kHz, -2° at 20 kHz |
Equivalent Input Noise | -86 dBu |
Noise | -82 dB Below 0 dBu |
Frequency Response | 20 Hz to 20 kHz, ±1.5 dB |
Controls | -15 dB Pad Switch Ground-Lift Switch |
Power | 48 V Phantom Power, Proprietary Digital Switching |
Dimensions | 4.25 x 2.75 x 1.75" / 108 x 70 x 44 mm |
Operating Temperature | 41 to 104°F / 5 to 40°C |
Weight | 1.2 lb / 540 g |
Packaging Info
Package Weight | 1.37 lb |
Box Dimensions (LxWxH) | 6.35 x 4.25 x 2.9" |
In the Box
- Radial Engineering Pro48 Active Direct Box
- 3-Year Manufacturer Warranty
No posts found