Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Radial Engineering USB-Pro Stereo USB Laptop DI
EAN: 676101040599
The Radial Engineering USB-Pro is a stereo USB laptop DI offering high-resolution conversion and an easy plug-and-play solution for connecting a Mac or Windows computer to a PAsystem or mixing console. Plus, its integrated headphone amplifier allows convenient signal monitoring at the DI.
The USB-Pro features two balanced XLR 3-pin outputs, which can feed mic- or line-level inputs thanks to the unit s handy level control. The auto-sensing USB input automatically configures the USB-Pro for digital input streams up to 24-bit / 96 kHz resolution. Since the USB-Pro is bus powered via USB, it requires no batteries, phantom power, or bulky power adapters.
Engage the mono switch to check for phasing, reduce the channel count on your mixer, or facilitate signal duplication to the two XLR outputs. Should hum or buzz caused by ground loops be encountered, the side-panel switches let you insert isolation transformers into the signal path. To further reduce susceptibility to noise, this is augmented with a ground-lift switch that lifts pin 1 on the XLR outputs.
Rugged 14-gauge steel construction along with Radial s bookend design ensure road-worthy reliability while the no-slip pad provides mechanical and electrical isolation.
Plug-and-play operation requires no drivers
Built-in headphone amplifier for monitoring
USB Type-B input for streaming audio from a Mac or Windows computer
Up to 24-bit / 96 kHz resolution with automatic format recognition
Balanced low-impedance XLR outputs
3.5mm stereo headphone output jack
Level control adjusts the main and headphone output signals
Mono switch with LED indicator sums the stereo input to mono to reduce the channel count or feed two devices at the same time
Operates via USB bus power
Power LED indicator
Rugged 14-gauge steel chassis and outer shell
Bookend design creates a protective zone around the jacks and switches
No-slip pad provides mechanical and electrical isolation and keeps the unit from sliding around
Ground-lift switch helps eliminate buzz and hum from ground loops
Per-channel isolation switches insert isolation transformers into the signal path to help prevent extraneous noise caused by ground loops
EAN: 676101040599
The Radial Engineering USB-Pro is a stereo USB laptop DI offering high-resolution conversion and an easy plug-and-play solution for connecting a Mac or Windows computer to a PAsystem or mixing console. Plus, its integrated headphone amplifier allows convenient signal monitoring at the DI.
The USB-Pro features two balanced XLR 3-pin outputs, which can feed mic- or line-level inputs thanks to the unit s handy level control. The auto-sensing USB input automatically configures the USB-Pro for digital input streams up to 24-bit / 96 kHz resolution. Since the USB-Pro is bus powered via USB, it requires no batteries, phantom power, or bulky power adapters.
Engage the mono switch to check for phasing, reduce the channel count on your mixer, or facilitate signal duplication to the two XLR outputs. Should hum or buzz caused by ground loops be encountered, the side-panel switches let you insert isolation transformers into the signal path. To further reduce susceptibility to noise, this is augmented with a ground-lift switch that lifts pin 1 on the XLR outputs.
Rugged 14-gauge steel construction along with Radial s bookend design ensure road-worthy reliability while the no-slip pad provides mechanical and electrical isolation.
Plug-and-play operation requires no drivers
Built-in headphone amplifier for monitoring
USB Type-B input for streaming audio from a Mac or Windows computer
Up to 24-bit / 96 kHz resolution with automatic format recognition
Balanced low-impedance XLR outputs
3.5mm stereo headphone output jack
Level control adjusts the main and headphone output signals
Mono switch with LED indicator sums the stereo input to mono to reduce the channel count or feed two devices at the same time
Operates via USB bus power
Power LED indicator
Rugged 14-gauge steel chassis and outer shell
Bookend design creates a protective zone around the jacks and switches
No-slip pad provides mechanical and electrical isolation and keeps the unit from sliding around
Ground-lift switch helps eliminate buzz and hum from ground loops
Per-channel isolation switches insert isolation transformers into the signal path to help prevent extraneous noise caused by ground loops
Radial Engineering R800 1050 Specs
| Circuit Type | Custom Decoder with Analog Line Drive |
| Inputs | 1 x USB Type-B |
| Outputs | 2 x XLR 3-Pin Male Balanced Mic/Line Outputs 1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output |
| USB Compatibility | USB 1.1 Full Speed |
| Bit Depth | 24-Bit, 16-Bit |
| Sampling Rate | 44.1, 48, 88.2, or 96 kHz (Set by Host Computer) |
| File Compatibility | WDM, MME, ASIO, CoreAudio, DirectSound, WASAPI, and WAV |
| System Requirements | macOS Windows XP or Later |
| Frequency Response | 5 Hz to 40 kHz (30 Hz to 18 kHz with Isolation) |
| Dynamic Range | >90 dB |
| Noise | <-90 dB |
| Maximum Output Level | +8 dBu |
| Total Harmonic Distortion | <0.01% |
| Stereo Separation | 75 dBu |
| Output Impedance | XLR Output: 250 Ohms (Nominal) Headphone Output: 8 to 400 Ohms |
| Isolation | Switchable per Channel |
| Ground Lift | Switchable (Lifts Pin 1 on Both XLR Outputs) |
| Power Requirements | USB Bus Power, 500 mA Maximum |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Construction | 14-Gauge Steel Chassis and Outer Shell |
| Dimensions | 3.3 x 5 x 2" (83.8 x 127 x 50.8 mm) |
| Weight | 1.5 lb / 0.7 kg |
Packaging Info
| Package Weight | 1.82 lb |
| Box Dimensions (LxWxH) | 6.4 x 4.2 x 2.85" |
In the Box
- Radial Engineering USB-Pro Stereo USB Laptop DI
- 3-Year Transferable Warranty
No posts found
