Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Rupert Neve Designs RNDI-S Stereo DI Box for Keyboards, Basses & More
EAN: 752423657414
Designed for guitarists, keyboardists, bass players, and other instrumentalists, the Rupert Neve Designs RNDI-S is a stereo DI box that employs the same architecture and design of the well-regarded RNDI. The DI Box utilizes custom RND transformers as well as Class-A biased, discrete FET amplifiers. This ensures both a rich tone and high headroom so that you maintain a powerful tone when you plug your instrument into a house PA, mixing desk, or recording interface.
The device sports two 1/4 instrument inputs and a stereo 3.5mm auxiliary input for consumer-grade devices. You can switch between the 3.5mm input and the 1/4 section by toggling the front-panel switch. Two 1/4 thruputs are on hand should you want to route parallel signal to your onstage amplifier. On the rear of the RNDI-S, you ll find two XLR outputs for feeding the house PA or recording interface. Ground-lift switches allow you to minimize any hum associated with ground loops. The unit is powered via 48V phantom power straight from the house or recording interface.
The unit sports a virtually flat frequency response from 30 Hz to 63 kHz, and quite little in the way of distortion. Because of its transformer-coupled outputs, the RNDI-S can drive long cable lines with minimal signal loss. You can mount the RNDI-S into a rack-shelf via its 4-hole pattern, specifically sized for 6-32 machine screws.
Key Features at a Glance
EAN: 752423657414
Designed for guitarists, keyboardists, bass players, and other instrumentalists, the Rupert Neve Designs RNDI-S is a stereo DI box that employs the same architecture and design of the well-regarded RNDI. The DI Box utilizes custom RND transformers as well as Class-A biased, discrete FET amplifiers. This ensures both a rich tone and high headroom so that you maintain a powerful tone when you plug your instrument into a house PA, mixing desk, or recording interface.
The device sports two 1/4 instrument inputs and a stereo 3.5mm auxiliary input for consumer-grade devices. You can switch between the 3.5mm input and the 1/4 section by toggling the front-panel switch. Two 1/4 thruputs are on hand should you want to route parallel signal to your onstage amplifier. On the rear of the RNDI-S, you ll find two XLR outputs for feeding the house PA or recording interface. Ground-lift switches allow you to minimize any hum associated with ground loops. The unit is powered via 48V phantom power straight from the house or recording interface.
The unit sports a virtually flat frequency response from 30 Hz to 63 kHz, and quite little in the way of distortion. Because of its transformer-coupled outputs, the RNDI-S can drive long cable lines with minimal signal loss. You can mount the RNDI-S into a rack-shelf via its 4-hole pattern, specifically sized for 6-32 machine screws.
Key Features at a Glance
- Custom Rupert Neve Designs transformers for rich, powerful tone
- Exceptional performance with any instrument
- Discrete FET amplifiers ensure clarity
- Drives long cable lines with minimal loss
- Rugged steel frame built for life on the road
- Powered by 48V phantom power
- Excellent phase coherence at all frequencies
Rupert Neve Designs RNDIS Specs
| I/O | 2 x 1/4" Instrument Inputs, Phone Type 2 x 1/4" Instrument Thruputs, Phone Type 1 x 3.5 mm TRS Auxiliary Input, Phone Type 2 x XLR Outputs |
| Noise | > -110 dBV (22 Hz to 22 kHz, Measured Output, Unweighted, Source Impedance 150 Ohms) |
| Input Impedance | Instrument: 2.2 MOhms Auxiliary: 95 kOhms |
| Output Impedance | < 40 Ohms |
| Frequency Response | 30 Hz to 63 kHz (±0.25 dB) 12.5 Hz to 120 kHz (±1 dB) 5 Hz (-3 dB) |
| Maximum Input Level | Instrument Input: +20.5 dBu, Typical |
| Maximum Output Level | 11.5 dBu, Typical |
| THD + N | 0.35%, Typical (2nd and 3rd Harmonic at 1 kHz, +20 dBu Input Level, No Load) 0.009%, Typical (2nd and 3rd Harmonic at 1 kHz, -20 dBu Input Level, No Load) 0.9%, Typical (2nd and 3rd Harmonic at 20 Hz, -20 dBu Input Level, No Load) |
| Crosstalk | Instrument Input: -115 dB at 10 kHz Auxiliary Input: -108 dB at 10 kHz |
| Power Requirements | 48 VDC, 4.5 mA per Channel, Phantom Powered |
| Rackmountable | 4-Hole Pattern at Bottom of Unit, for 6-32 Machine Screws |
| Dimensions | Not Specified by Manufacturer |
| Weight | Not Specified by Manufacturer |
In the Box
- Rupert Neve Designs RNDI-S Stereo DI Box for Keyboards, Basses & More
- 2-Year Manufacturer Warranty
No posts found
