AEA Ribbon Mics TRP3 Compact 2-Channel Microphone Preamp

AEA Ribbon Mics TRP3 Compact 2-Channel Microphone Preamp

EAN: 652401978268

Get all the clean gain you could ever need for the quietest mic sources with the AEA Ribbon Mics TRP3, a two-channel microphone preamp made in the USA by the same company known for its premium ribbon mics. This compact half-rack unit offers balanced XLR mic inputs and high-impedance, and low-noise circuitry, so it can yield optimal results with ribbon, condenser, or dynamic microphones.

Between the 12-position mic-pre gain and the continuously variable output level, up to 85 dB of JFET gain is available for each channel. Three LEDs are provided per channel for a clear indication of levels at -20, 0, and +24 dBu. Tame bass buildup and proximity effect at the push of a button with the low-cut filter, which cuts 3 dB at either 115 or 230 Hz, depending on your setting. The TRP3 includes an external universal switching power supply to allow operation in any country.

3rd Generation Design

The TRP3 features AEA s third-generation circuit design for the cleanest and most musical sonic signature yet from the TRP series. The TRP3 excels at drawing out the warm lush sound for which ribbon mics are prized.

Features at a Glance

• Two channels with 85 dB of sweet and quiet JFET gain
• Switchable -3 dB low-cut filter at 115 or 230 dB
• Optimized for ribbon, condenser, and dynamic mics
• Switchable phantom power and polarity
• 68-kilohm high-impedance circuitry provides better transients, frequency response, and higher output sensitivity
• Switching power supply for use in any country
• 1 RU half-rack with optional hardware for mounting one or two units together
• Made in the USA

Controls

• LED Indicators: Green, yellow, and red LEDs indicate levels at -20, 0, and +24 dBu
• LF Switch: This inserts the 12 dB/octave low-cut filter at 100 Hz
• P48 Switch: Out is off In applies full-spec P48 phantom power to the input (indicated by the red LED near the switch)
• Polarity Switch: Out is normal In is inverted
• Mic Gain: This 12-position switch selects from +7 to +63 dB of preamplifier gain
• Output Level: This continuously variable control provides up to +22 dB additional output gain