EAN: 813721013156
The RU-MLA2T from RDL is a two channel microphone/line preamp and a four channel audio distribution amplifier. The input and all four outputs may be connected either through the front-panel XLR jacks, or on the rear panel detachable terminal blocks, with both the front-panel XLR connectors, and the rear-panel terminals, active at all times.
The unit will accept either a balanced microphone or line level signal, while each of the four outputs provide either a microphone or line level signal. The audio input is equipped with a rear-panel switch to select between microphone and line level with two additional switches allowing for setting the microphone input for low or high gain and for switching the 24VDC phantom power.
Gain trim is provided on a knurled front-panel control with a screwdriver slot, that allows for setting the gain by hand or with a screwdriver. Each output is provided with a separate rear-panel switch to set its level to either microphone or line and each output is isolated from the other and may be wired balanced or unbalanced.
Each output of the RU-MLA2T is equipped with a studio-quality, audio output transformer.
Two-channel audio preamplifier with switch-selectable microphone or line inputs
Front panel XLR input and output jacks
Detachable rear panel input and output terminal blocks
All four outputs available simultaneously
Switch-selectable microphone gain and +24V phantom power
Gain trim on each input
Each output is switch-selectable as microphone or line level
Each output is equipped with a studio-quality audio output transformer
RDL RU-MLA2T Specs
| Number of Channels | 2 |
| Inputs | 2 x XLR Rear panel detachable terminal block |
| Output | 2 x XLR Rear panel detachable terminal block |
| Phantom Power | +24V |
| Multi Function | Four channel audio distribution |
| Gain Range | Mic: Off to 52dB (low gain) Off to 69dB (high gain) Line: |
| Maximum Output Level | +22dBu |
| Frequency Response | Mic: 80Hz to 50kHz, +/-0.75dB Line: |
| Noise | Mic: -79dB (50dB gain); -70dB (60dB gain) Line: |
| Dimensions | 5 13/16" x 3 1/2" x 1 3/4" (147 x 89 x 45 mm) |
| Weight | 2 lbs (0.9 kg) - shipping |
| Specialties | Requires ground referenced 24 to 33VDC @ 80mA power supply The unit can be rack-mounted with the XLR jacks facing forward, or reverse-mounted using the optional RU-FP1 filler panel/reverse mount kit |
Packaging Info
| Package Weight | 1.95 lb |
| Box Dimensions (LxWxH) | 6.7 x 6.3 x 2.5" |
In the Box
- RDL RU-MLA2T - Dual Channel Microphone/Line Preamplifier with Four Channel Audio Distribution and a Studio-Quality Transformer on Each Output
- 3-Year Manufacturer Warranty
No posts found
