Rupert Neve Designs Two Portico 511 Mic Preamps with Six-Space 500-Series Rack

Rupert Neve Designs Portico 511 Mic Preamp

EAN: 752423656950

The Portico 511 Mic Preamp from Rupert Neve Designs is a single channel, transformer-balanced microphone preamp that brings the features and performance of the full-sized Portico outboard rack units to the 500-series format. The 511 provides 66dB of gain, and a +/- 6dB Trim knob is provided for fine tuning. Texture can be added by pushing the Silk button, which activates dedicated circuitry. The desired amount of texture can be dialed in with a knob, which adds harmonic content–creating tones that are reminiscent of vintage Neve equipment.

The 511 isn t limited to working with microphones. With the Gain knob set at 0 dB, the unit is capable of accepting line-level signals. Condenser microphones and active DI boxes can be powered by engaging the 48V phantom power button on the 511. An illuminated Polarity button inverts the signal when pressed. A variable High-Pass Filter can be engaged by an illuminated button as well, and a knob enables you to sweep between 20-250 Hz. An eight-segment LED meter allows you to visually monitor the output. A 500-Series power supply/rack is required for operation.

Rupert Neve Designs R6 Six Space 500 Series Rack

EAN: 752423657322

With 150% of the required current for a 6-space 500-series enclosure, the Rupert Neve Designs R6 will help you hear the full potential of your modules. The headroom in available current helps prevent the power rails from falling under a higher than expected load. LED metering shows you how much power is being used and the internal power supply has been designed with double shielding to avoid significant magnetic induction in any of the channel positions.

The solid steel chassis has a collapsible handle for portability. The unit offers a total of eight balanced I/O channels with interchangeable TRS, XLR, and DB-25 connections with a 48V phantom power bus. The channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from and to DB-25, XLR, and TRS connectors. To accommodate 500 series modules that are slightly out of spec, the unit has variable-position screw holes to make the installation process go more smoothly. A 500 series link function can be enabled in pairs using the link jumpers on channels 1-2, 3-4, or 5-6. Matching blank panels are also available to cover any empty slots.

150% Available Current

Prevents power rails from failing under a higher than expected load

Connections

Features balanced DB-25, XLR, and TRS connections to ensure connectivity wherever you go with the back panel patch bay

Power Monitoring

Monitors the current usage to ensure that you never run short of power. The metering can also be useful for troubleshooting a module that is severely overdrawing its allotment

Double Shielded PSU

Helps avoid significant magnetic induction in any of the channel positions

Channel 7-8 Thru Conversion

Allows you to quickly and easily convert your signal from/to DB-25, XLR, and TRS connectors

48V Phantom Supply

Provides reliable power to your microphones using the +48V bus

Solid Steel Chassis

Provides durable and reliable use in a range of recording applications with rubber feet for both horizontal and vertical mounting

Collapsible Handle

Improves the portability of the enclosure

Variable Position Screw Holes

Makes it easier to install 500 series modules that are slightly out of spec

500 Series Link Function

Enables Channels 1-2, 3-4, or 5-6 to be linked using link jumpers