The highly flexible TASCAM Model 16 is a powerful, versatile, hybrid mixer/recorder/audio interface for both live and recording applications well suited for bands, studios, conferences, podcasts, houses of worship, and more. The full-featured, space-saving mixer offers 14 input channels including 10 HDDA microphone preamps with phantom power, two 1/4" Hi-Z jacks, eight balanced 1/4" mono line inputs, and two balanced 1/4" stereo line inputs. Additionally, the last stereo input can accept signals from a variety of sources including Bluetooth, USB, RCA, or a 3.5mm stereo mini jack.
There is single-knob compression available on the first eight channels, while three auxiliary sends provide signal routing to a dedicated monitor and to one of 16 onboard multi-FX presets. The main and sub stereo buses offer simple grouping as well as a selectable and assignable 4-band semi-parametric EQ for fine tuning your mix. The Model 16 offers 15 faders, with 60mm of throw for quick and immediate mixing moves. Each channel may be assigned to receive audio from the live inputs, the internal multitrack recorder, or the USB 2.0 audio interface, allowing for versatility in any environment. The integrated 16-track recorder takes its cue from TASCAM s Portastudio line, offering multitrack recording with the ability to record the 14 input channels plus the main mix to an SD card as well as multichannel playback for advanced live performance backing or mixing. What s more, the simple interface allows you to overdub and punch in/out without extensive menu diving. Additionally, the Model 16 features a built-in 16x14 USB 2.0 audio interface (up to 24-bit / 48 kHz resolution) for DAW-based recording and playback.
Mixer
- 14 total input channels
- 10 microphone preamps with 48V phantom power
- Two Hi-Z instrument inputs
- 12 balanced line inputs (eight mono, two stereo)
- Single stereo channel for Bluetooth, USB, RCA, or 3.5mm stereo input
- Inserts on channels 1-2
- Main and sub stereo buses
- Three aux sends (monitor 1, monitor 2, and effects)
- Single-knob compressor for channels 1-8
- 4-band semi-parametric stereo EQ selectable for main or monitor outputs
- Wireless Bluetooth 5.0 connectivity
- Onboard effects processor with 16 editable and foot-controllable effects presets including reverb, delay, chorus, and flanger
- 60mm faders capable of fine adjustment
- Independent input channel assign for live, internal MTR, or USB playback
- Balanced XLR main outputs
- Balanced 1/4" TRS sub outs, aux outputs, and control room outputs
- 1/4" stereo headphone output with dedicated volume control
Recorder
- Multitrack recording function similar to the TASCAM Portastudio
- 16 tracks (14 input channels plus the main mix) can be recorded to an SD card
- Multichannel playback for advanced live performance backing or mixing
- Punch in/out recording capability
- Overdub up to eight tracks simultaneously
Audio Interface
- USB 2.0 audio interface
- 16 inputs (14 input channels plus the main mix)
- 14 outputs
- Up to 24-bit / 48 kHz recording quality
- Low round-trip latency
Optional Accessories
- RC-1F footswitch (available separately) allows hands-free control of effects switching
- Model 16 rackmount kit (available separately) enables convenient mounting in a 19" equipment rack
- Model 16 dust cover (available separately) protects the Model 16 from dirt, scratches, and moisture
EAN: 043774034079
TASCAM MODEL 16 Specs
| Form Factor | Desktop |
| Number of Tracks | 16 |
| Maximum Simultaneous Tracks | 14 x Recording |
| Maximum Sampling Rate | 48 kHz / 24-Bit |
Signal Processing
| Gain/Trim Range | Mic Inputs: Up to 79 dB USB, SD: 24 dB XLR Mic Inputs: 0 dB to 50 dB 1/4" Line Inputs: -10 dB to +40 dB (Channels 1 to 8) -20 dB to +30 dB (Channels 9 to 12) |
| High-Pass Filter | 100 Hz, 18 dB/Octave |
| EQ Parameters | Mono Channels: High: ±15 dB at 12 kHz (Shelving) Mid: ±15 dB at 100 Hz to 8 kHz, 0.55 Q (Semi-Parametric) Low: ±15 dB at 80 Hz (Shelving) Stereo Channels: High: ±15 dB at 12 kHz Mid: ±15 dB at 600 Hz, 0.55 Q (Notch/Peak) Low: ±15 dB at 80 Hz (Shelving) Master: High: ±15 dB at 10 kHz (Shelving) Mid: ±15 dB at 100 Hz to 8 kHz, 0.5 to 5 Q (Parametric) Low: ±15 dB at 60 Hz (Shelving) |
Connectivity
| Analog Audio I/O | 10 x XLR 3-Pin Balanced Mic Input 12 x 1/4" TRS Balanced Line Input 1 x Stereo RCA Coaxial Unbalanced Line Input 1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Output 2 x 1/4" TRS Unbalanced Insert In/Out 2 x XLR 3-Pin Balanced Main Output 3 x 1/4" TRS Balanced Aux Output 2 x 1/4" TRS Balanced Control Room Output 2 x 1/4" TRS Balanced Subgroup/Bus Output 1 x 1/4" TRS Headphone Output |
| Phantom Power | 48 V, Selectable On/Off |
| Host Connection Protocol | USB 2.0 |
| Other I/O | 1 x 1/4" TS Footswitch Input |
| Wireless Connectivity | Bluetooth |
Performance
| Frequency Response | Analog: 20 Hz to 30 kHz +0.5/-1 dB Digital: 20 Hz to 20 kHz +0.5/-1 dB |
| Maximum Input Level | XLR Mic Inputs: +10 dBu 1/4" Line Inputs: +22 dBu Insert Return: +18 dBu RCA Inputs: +8 dBV 1/8" / 3.5 mm Inputs: +8 dBV |
| Maximum Output Level | Main Outputs: +22 dBu Monitor/FX/Subgroup/Control Room Outputs: +16 dBu Insert Send: +18 dBu |
| Headphone Output Power | 10 mW per Channel into 60 Ohms (Max) |
| Impedance | Main Outputs: 100 Ohms Control Room/FX/Monitor/Subgroup Outputs: 200 Ohms Insert Send: 100 Ohms Headphone Outputs: 32 Ohms XLR Mic Inputs: 1.8 Kilohms 1/4" Line Inputs: 22 Kilohms Insert Return: 10 Kilohms RCA Inputs: 10 Kilohms 1/8" / 3.5 mm Inputs: 10 Kilohms |
| THD | Mic Inputs: < 0.01% (Min Gain, +10 dBu Input, 1 kHz) < 0.004% (Min Gain, +4 dBu Input, 1 kHz) |
| Crosstalk | -80 dB (1 kHz) |
| EIN | -127 dBu (150-Ohm Source, Max Gain) |
Digital Audio
| Audio File Formats | BWF, WAV |
| Sample Rates | 44.1 / 48 kHz |
| Bit Depths | 16 / 24-Bit |
Audio Storage & Playback
| Supported Media | SD Card |
| Memory Card Slot | 1 x SDXC |
| Supported Media Capacity | SD: 512 MB Minimum to 2 GB Maximum SDHC: 4 GB Minimum to 32 GB Maximum SDXC: 64 GB Minimum to 512 GB Maximum |
| File System Support | SD: FAT16 SDHC: FAT32 SDXC: exFAT |
Compatibility
| OS Compatibility | macOS 10.12 or Later Windows 7 or Later (32-Bit, 64-Bit) |
| Supported Drivers/API & Plug-Ins | Core Audio (Mac) Windows Class-Compliant (No Driver Needed) ASIO 2.0 WDM MME |
| Processor Requirement | 2 GHz or Better |
| RAM Requirements | 2 GB |
| Minimum Display Resolution | 1280 x 800 |
| Required Hardware | Available USB 2.0 Port |
Power
| Power Requirements | AC Input |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 40 W |
Physical
| Operating Temperature | 41 to 95°F / 5 to 35°C |
| Dimensions | 16.9 x 18.2 x 4.4" / 43 x 46.3 x 11.3 cm (Including Controls and Protrusions) |
| Weight | 15.4 lb / 7.0 kg |
Packaging Info
| Package Weight | 22.135 lb |
| Box Dimensions (LxWxH) | 23 x 20 x 8.8" |
In the Box
- TASCAM Model 16 Hybrid 14-Channel Mixer, Multitrack Recorder, and USB Audio Interface
- AC Power Cable
- 2-Year Manufacturer Warranty (Parts)
- 90-Day Manufacturer Warranty (Labor)
Customer reviews
Recommendation for purchase
