EAN: 890833000724
The Stereo Variable MU Limiter Compressor from Manley Labs is a dynamic signal processor using a 5670 dual triode tube for peak reduction and compression. The tube is constantly re-biased by the vacuum tube rectified side chain control voltages, resulting in a smooth change in gain.
The compressor setting offers a soft-knee 1.5:1 ratio, while the limit mode offers a sharper knee with ratios ranging from 4:1 to 20:1. With higher limiting settings, the knee will start to soften. Distortion effects can be achieved by turning up the input and lowering the output while using little or no compression. The side chain high pass filter uses a 1-pole, 6 dB/octave filter that attenuates 1 to 3 dB at 100 Hz and 4 to 6 dB at 50 Hz. Once engaged, the compressor / limiter will not respond as strongly to low frequency content and will prevent audible pumping when processing bass-heavy music.
The input of the Variable MU is ganged, but can still process two independent channels with separate threshold and output controls. With the link switch engaged, the unit operates in true stereo mode and excels at processing 2-track, final mix, or mastering compression and limiting. Handmade in the USA, the unit is housed in a 2U steel chassis with a CNC-machined 1/4 faceplate that is also inlaid with laser-engraved inserts. The Variable MU ships with an IEC power cable.
- Manley input and output transformers with nickel laminations in mu-metal cases
- Balanced inputs and outputs (600 a„¦)
- Independently regulated B+ and heater supplies
- Bypass Switch: Hardwire true bypass
- Input Attenuator: -8 to +8 dB stepped Greyhill switch
- Variable Attack: 25 to 70 ms
- Threshold: Continuously variable
- 5-Step Recovery Switch: .2, .4, .6, 4, 8 sec
- Compression Ratio: 1.5:1
- Limit Ratio: 4:1 to 20:1
- Large Illuminated Sifam Meters: Displays the amount of dB gain reduction
- Stereo link switch
Manley Labs MSLCHP Specs
| Number of Channels | 2 |
| Inputs | 2 x XLR transformer balanced (600 „¦) |
| Outputs | 2 x XLR transformer balanced (600 „¦) |
| Input Level | Input Level Switch: -8, -4, -2, -1, 0, +1, +2, +4, and +8 dB |
| Compression Threshold | Continuously variable threshold for compression and limiting |
| Ratio | Compressor: 1.5:1 Limiter: 4:1 to 20:1 |
| Attack Time | Variable Attack: 25 to 70 ms |
| Release Time | Recovery 5 Steps: 0.2, 0.4, 0.6, 4.0, 8.0 sec |
| Maximum Output Level | +30 dBu (26 Vrms) 26 dB Headroom |
| Make-up Gain | +35 dB |
| Frequency Response | 20 Hz to 25 kHz |
| THD & Noise | <0.1% THD @ 1 kHz Noise Floor: -85 dB typical |
| Meter | Illuminated Sifam meters |
| Tubes per Side | Fully Differential All-Tube Circuitry: 5670, 5751 (or 12AX7), 7044 (or 5687), & 12AL5 |
| High Pass Filter | HP SC: High Pass Side Chain Filter: -1 to -3 dB @ 100 Hz -4 to -6 dB @ 50 Hz |
| Rackmountable | 2 U |
| Power Supply | 240 VAC, 80 W, 60 Hz |
| Fuse | Mains Fuse Value: 1.25 A Mains Fuse Type: MDA or MDL SLO-BLO Time Delay: 1-1/4" x 1/4" |
| Dimensions (WxHxD) | 19.0 x 3.5 x 10.0" / 48.3 x 8.9 x 25.4 cm Power Transformer protrudes 3.5" / 8.9 cm out back of chassis |
| Weight | 14.0 lb / 6.4 kg |
Packaging Info
| Package Weight | 21.75 lb |
| Box Dimensions (LxWxH) | 22.6 x 18.1 x 8.6" |
In the Box
- Manley Labs Stereo Variable MU Limiter Compressor
- IEC Power Cable
- 2 Year Manufacturer Warranty
Registration Extension: 5-Year
No posts found
