Upgrade your home setup, project studio, or broadcast/production suite with this , which includes a pair of Genelec 8020 Bi-Amplified Active Monitors, one Genelec 7040 Studio Subwoofer, and a compact stereo volume controller. With a 4" woofer, a 3/4" metal dome tweeter, and two Class-D power amplifiers in an aluminum low-diffraction enclosure, each monitor provides a frequency response of 62 Hz to 20 kHz. The subwoofer s 6.5" driver and Laminar Spiral Enclosure technology enable it to handle low-frequency reproduction from 30 to 85 Hz. Thanks to a small footprint and full-spectrum sonic bandwidth, this kit is ideal for use in recording, editing, and mixing environments where space is limited.
Genelec 8020D Studio Monitor (Producer Finish)
Styled in what the manufacturer has dubbed a " Producer Finish" , and utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4" Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec s Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾ " tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shielded
Genelec 7040A Studio Subwoofer
Provided here in a dark gray producer finish, the Genelec 7040A Studio Subwoofer is a studio subwoofer designed to provide accurate low-frequency reproduction in limited production spaces. Its small footprint suits project studios, mobile vans, and portable recording systems.
This sub is the ideal complement to Genelec 8010A and 8020A monitors. It extends the low-frequency response down to 30 Hz, and uses Genelec s patented Laminar Spiral Enclosure (LSE) technology to provide both precise bass articulation and extended low-frequency capacity. When used in a stereo system, the sub can produce 100 dB of undistorted SPL by means of its 6.5" woofer, and its powerful Class-D amplifier.
Built-In Bass Management
Balanced XLR connectors are used for the audio inputs and outputs. There are two input connectors and two outputs. The bass-management unit in the 7040A subwoofer splits the input into low- and high-frequency components at 85 Hz. Frequencies below 85 Hz are reproduced by the subwoofer. Frequencies above 85 Hz are directed via the subwoofer s output connectors to the main monitors. The subwoofer s outputs have the same level as the inputs.
Adjustable Sensitivity
The subwoofer sensitivity can be adjusted from +12 to -6 dBu to match the subwoofer sound level easily with different monitors.
Variable Bass Roll-Off & Phase
Two BASS ROLL-OFF switches provide bass-response adjustment to compensate for the acoustical environment in three 2 dB steps. Two switches allow alignment of subwoofer phase with the monitors. The phase can be adjusted in 90-degree increments between 0 and -270° .
Genelec 9000A Stereo Volume Control (Mystic Black)
The 9000A Stereo Volume Control (Mystic Black) from Genelec is a compact stereo volume control unit that provides convenient volume control for all Genelec loudspeakers. The control has a Y-style cable that splits into standard 3.5mm male and female connectors for audio input and output, providing compatibility with a variety of computers, MP3 players, gaming devices, and more.
Note:
A converter cable (sold separately) may be needed for connecting to equipment that has RCA and/or XLR connectors.
Compact design provides convenient volume control for all Genelec loudspeakers
Standard 3.5mm I/O connectors provide wide compatibility with various audio devices
Genelec 8020D Studio Monitor (Producer Finish) Specs
Monitor Type & Configuration | Active 2-Way |
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported, Shielded |
Total Power Output | 100 W |
Drivers
Tweeter | 1 x 0.75" / 19.1 mm Metal Dome |
Woofer | 1 x 4" / 10.2 cm Cone |
Amplifiers | HF: 1 x 50 W LF: 1 x 50 W |
Performance
Frequency Response | 62 Hz to 20 kHz ± 2.5 dB |
Maximum Sound Pressure Level (SPL) | 107 dB |
Total Harmonic Distortion (THD) | 0.05% |
THD+N | < 0.05% |
Maximum Input Level | +24 dBu |
Analog Input Sensitivity/Gain | +36 to -6 dBu (Continuously Variable) |
Self-Generated Noise | Less Than 5 dBA (at 3` / 1 m) |
Protections and Limiting | Driver Protection |
Signal Processing
EQ | 1 x LF Shelf: -4 to 0 dB at 65 Hz 1 x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz 1 x HF Tilt: -2 to 0 dB at 15 kHz |
Crossover Frequency | 3 kHz |
Connectivity
Audio I/O | 1 x XLR 3-Pin Balanced Input (10 Kilohms) |
Network I/O | None |
USB | None |
Wireless | None |
Power
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 0.5 W (Standby) 3 W (Idle) 60 W (Maximum) |
Color | Producer Gray |
Dimensions (W x H x D) | 6 x 9.5 x 5.6" / 151 x 242 x 142 mm |
Weight | 7.0 lb / 3.2 kg |
Packaging Info
Package Weight | 8.77 lb |
Box Dimensions (LxWxH) | 14.95 x 7.95 x 7.75" |
Genelec 7040A Studio Subwoofer Specs
Monitor Type & Configuration | Active Subwoofer |
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported |
Total Power Output | 50 W |
Drivers
Subwoofer | 1 x 6.5" / 16.5 cm Cone |
Amplifiers | Subwoofer: 1 x 50 W Class-D |
Performance
Frequency Range | 33 Hz to 85 Hz ± 3 dB |
Maximum Sound Pressure Level (SPL) | 100 dB |
THD+N | 0.8% |
Analog Input Sensitivity/Gain | +12 dBu to -6 dBu (Continuously Variable) |
Protections and Limiting | Thermal Limiting |
Signal Processing
Crossover Frequency | High-Pass: 85 Hz Low-Pass: 35 Hz |
Phase Adjustment | 4-Position Switch |
Connectivity
Audio I/O | 2 x XLR 3-Pin Balanced Input (10 Kilohms) |
Network I/O | None |
USB | None |
Wireless | None |
Power
AC Input Power | 100 to 140 VAC, 50/60 Hz |
Power Consumption | 5 W (Idle) 70 W (Maximum) |
Color | Black |
Dimensions (W x H x D) | 13.8 x 16.1 x 8.1" / 350 x 410 x 205 mm |
Weight | 24.9 lb / 11.3 kg |
Packaging Info
Package Weight | 29 lb |
Box Dimensions (LxWxH) | 20 x 16 x 11" |
Genelec 9000A Stereo Volume Control (Mystic Black) Specs
Cable Length | 6.6` (2 m) (overall) |
Connectors | 1 x 3.5mm mini input 1 x 3.5mm mini output |
Dimensions | 2.1 x 1.6" (60 x 42 mm) |
Weight | 11.5 oz (325 g) |
Packaging Info
Package Weight | 0.785 lb |
Box Dimensions (LxWxH) | 4.55 x 4.4 x 1.85" |
In the Box
- Power Cord
- 2-Year Manufacturer Warranty
Registration Extension: 3-Year
No posts found