The S5H from Adam Professional Audio is an active studio reference monitor designed for horizontal orientation in medium-sized and large control rooms. Capable of delivering 1800W RMS of cumulative amp power, it features two 10a€? HexaCone woofers, one 4a€? dome/cone hybrid midrange driver, and a handmade folded-ribbon tweeter. The waveguides, Adam-designed mid- and high-range propagation systems (MPS and HPS), ensure a wide, stable sweet spot.
Developed for transparency, the S5Ha€™s frequency response is an impressive 22 Hz to 50 kHz. A multitude of DSP options, from equalization to delay, are provided for tailoring the monitor to the room and to personal preferences. The back panel features an OLED display and a push-button/rotary encoder to allow modification of parameters. Connect a computer to the USB Type-A jack for convenient remote access to all the S5Ha€™s settings.
Two inputs, balanced analog and AES3 digital, are available via XLR jacks. An XLR AES3 output is provided to route digital signal to the second monitor, necessary for correct digital signal flow. Vary input sensitivity and output level as needed. Load and save voicing presets for quick configuration of monitor options. If further tonal adjustments are desired, there is a 6-band parametric EQ with high-pass and low-pass filters. Use up to 5 ms of delay for timing adjustments.
Adam S Series monitors, custom-developed with no off-the-shelf components, are handmade in Berlin according to strict manufacturing tolerances.
- 2 x 10 ELE (Extended Linear Excursion) HexaCone woofers
- Redesigned bass reflex tubes minimize resonance and signal loss
- 4 carbon composite DCH (Dome/Cone Hybrid) midrange driver
- Aluminum MPS (Midrange Propagation System) waveguide
- S-ART folded ribbon tweeter with aluminum HPS (High-frequency Propagation System) waveguide
- 1800W RMS cumulative power via four PWM (Class D) amplifiers
- 2 x 700W woofer amps
- 300W midrange amp
- 100W tweeter amp
- 24 Hz - 50 kHz frequency response
- Low harmonic distortion
- Adjustable input sensitivity and output level
- 6-band parametric equalizer with HPF and LPF filters
- Variable delay for timing adjustment
- XLR analog and AES3 digital inputs
- USB Type-A for remote access via computer
Adam Professional Audio Sub2100 - 1000W 21 Front-Firing Active Subwoofer
The Sub2100 from Adam Professional Audio is an active, front-firing subwoofer designed for strong bass response in large control rooms and studios. The large, 21 driver is housed in a specially-tuned bass-reflex cabinet to reproduce frequencies as low as 18Hz. A highly-efficient amplifier delivers up to 1000W of continuous power for a strong, linear performance with very little compression.
The rear panel of the subwoofer offers XLR and RCA inputs and outputs, as well as an XLR subwoofer output for daisy-chaining. A 180° & phase control is provided, as well as gain and high-pass filter controls.
Professional-quality subwoofer for large studios and control rooms
Large, 21 front-firing driver
High-efficiency amplifier provides up to 1000W of continuous power for strong output with low compression
Large voice coil maximizes SPL while maintaining ultra-low frequencies
Sturdy bass-reflex cabinet with isolation feet to reduce rumble and reflections
XLR and RCA I/Os
XLR subwoofer output for daisy-chaining
180° & phase control
High-pass filter and gain control knobs
Adam Professional Audio S5H Active Three-Way 2x10" Main/Midfield Studio Monitor (Horizontal, Single) Specs
Drivers
| Tweeter | 1 x 2" / 50.8 mm Ribbon |
| Midrange | 1 x 4" / 10 cm Composite Dome/Cone Hybrid Voice Coil: 2.4" / 60 mm |
| Woofer | 1 x 10" / 26.5 cm HexaCone Cone Voice Coil: 3" / 76 mm |
| Amplifiers | HF: 100 W Class-D MF: 300 W Class-D LF: 2 x 700 W Class-D |
Performance
| Frequency Range | 22 Hz to 50 kHz |
| Maximum Sound Pressure Level (SPL) | 131 dB |
| Total Harmonic Distortion (THD) | 0.3% |
| Maximum Input Level | +24 dBu |
Signal Processing
| EQ | 1 x HF Shelf 1 x LF Shelf |
| Crossover Frequency | Low-Pass: 250 Hz High-Pass: 3 kHz |
Connectivity
| Audio I/O | 1 x XLR 3-Pin Balanced Input (48 Kilohms) |
| Digital Audio I/O | 1 x XLR 3-Pin AES3 Input 1 x XLR 3-Pin AES3 Output |
| Network I/O | None |
| USB | 1 x USB-B (Remote) |
| Wireless | None |
Physical
| Color | Black |
| Dimensions (W x H x D) | 34.8 x 16.9 x 19.7" / 885 x 430 x 500 mm |
| Weight | 160.0 lb / 72.6 kg |
Power
| Monitor Type & Configuration | Active 3-Way |
| Number of Included Monitors | Single Monitor |
| Enclosure | Bass-Reflex/Ported, Shielded |
| Total Power Output | 1800 W RMS |
| AC Input Power | 100 to 240 VAC, 50/60 Hz |
| Power Consumption | 900 W (Maximum) |
Adam Professional Audio Sub2100 - 1000W 21" Front-Firing Active Subwoofer Specs
| Monitor Type & Configuration | Active Subwoofer |
| Number of Included Monitors | Single Monitor |
| Enclosure | Bass-Reflex/Ported, Unshielded |
| Total Power Output | 1000 W RMS / 1200 W Peak |
Drivers
| Subwoofer | 1 x 21" / 53.34 cm Paper Cone Voice Coil: 6" / 152 mm |
Performance
| Frequency Range | 18 Hz to 150 Hz |
| Maximum Sound Pressure Level (SPL) | 128 dB |
Signal Processing
| Crossover Frequency | 150 Hz |
| Phase Adjustment | 0 / 180° Phase Inversion |
Connectivity
| Audio I/O | 2 x XLR 3-Pin Balanced Input (10 Kilohms) 3 x XLR 3-Pin Balanced Output 1 x Stereo 2RCA Unbalanced Input 1 x Stereo 2RCA Unbalanced Output |
| Network I/O | None |
| USB | None |
| Wireless | None |
Power
| Color | Black |
| Dimensions (W x H x D) | 23.6 x 33.5 x 27.7" / 600 x 850 x 705 mm |
| Weight | 187.4 lb / 85.0 kg |
Packaging Info
| Package Weight | 185 lb |
| Box Dimensions (LxWxH) | 37.5 x 34 x 29.5" |
In the Box
- IEC Power Cord
- 2-Year Warranty with 3-Year Extension upon Online Registration
- Power Cord
- 2-Year Manufacturer Warranty
No posts found
