The Dynaudio Sub 18S is a subwoofer designed to work with a wide variety of Dynaudio professional monitors from BM6s to mastering-grade M5P towers. The sub makes use of dual 9 long-throw woofers that allow for accurate lows between 16 and 230 Hz at sound pressure levels of up to 110 dB.
The sub makes use of advanced DSP modeling technology to match any of the Dynaudio Pro Studio models, so you can turn your Dynaudio two-way setup into a 2.1 or even 2.2 system. If stereo subs are your preference, this sub with its XLR or RCA inputs and outputs supports daisy-chaining.
The sub offers a powerful punch thanks to two new MSP+ Hybrid Drive units and a Class-D 500W amp for absolute control and power. The 18S provides a display and menu system to select the specific Dynaudio speakers you re using in your monitoring setup. This means the roll-off can be tailored perfectly to suit your model.
You ll also have the ability to set a time delay with the sub, to better ensure that your system is in sync. Simply enter the distance from the sub to the speakers in the control panel, and the sub adjusts itself automatically using both time and phase delays. You ll also note the three-filter parametric EQ to easily defeat room modes that could affect your mix or master.
500W Class-D amplifier module
Dual 9 MSP+ Hybrid Drive long-throw woofers for accurate low-end frequency reproduction
Three-band built-in Parametric EQ
Preset speaker crossover filters
Time alignment for adjusting according to position
16 to 230 Hz frequency range
Dual opposing driver design principle
Daisy-chain multiple subwoofers
Dynaudio Acoustics Sub 18S Specs
| Monitor Type & Configuration | Active Subwoofer |
| Number of Included Monitors | Single Monitor |
| Enclosure | Sealed |
| Total Power Output | 500 W |
Drivers
| Subwoofer | 2 x 9.5" / 24.1 cm Cone |
| Amplifiers | LF: 500 W Class-D |
Performance
| Frequency Range | 16 Hz to 230 Hz ± 3 dB |
| Maximum Sound Pressure Level (SPL) | 110 dB |
Signal Processing
| EQ | 1 x LF Notch/Peak 1 x Mid Notch/Peak 1 x HF Notch/Peak |
| Filters | 1 x Low-Pass |
| Phase Adjustment | 0 / 180° Phase Inversion |
Connectivity
| Audio I/O | 2 x XLR 3-Pin Balanced Input 1 x XLR 3-Pin Balanced Output (100 Ohms) 1 x Stereo 2RCA Unbalanced Input 1 x Stereo 2RCA Unbalanced Output (100 Ohms) |
| Network I/O | None |
| USB | None |
| Wireless | None |
Power
| AC Input Power | 100 to 120 VAC, 50/60 Hz 220 to 240 VAC, 50/60 Hz |
| Power Consumption | 0.5 W (Standby) 490 W (Maximum) |
Physical
| Color | Black |
| Dimensions (W x H x D) | 17.6 x 11.8 x 10.6" / 44.7 x 30 x 26.9 cm |
| Weight | 45.2 lb / 20.5 kg |
Packaging Info
| Package Weight | 52.5 lb |
| Box Dimensions (LxWxH) | 23.5 x 17.75 x 15.38" |
In the Box
- Dynaudio Acoustics Sub 18S Dual 9" 500W Subwoofer (Black)
- Power Cord
- 2-Year Warranty
No posts found
