This Kit combines a pair of Genelec 8010 Bi-Amplified Active Monitors with a Genelec 7040A Studio Subwoofer and a stereo volume controller to form the primary components of a professional studio monitoring system. The 8010 s are designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25 W class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure. The monitor utilizes Genelec s Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 to 20,000 Hz, and provide a maximum SPL of 96 dB.
The 7040A is an ultra-compact studio subwoofer designed to provide accurate low frequency reproduction in limited production spaces and is the ideal to complement Genelec 8010 monitors. It extends the low frequency response down to 30 Hz and uses Genelec s patented Laminar Spiral Enclosure (LSE) technology, which provides precise bass articulation and extended low frequency capacity. The stereo volume controller provides convenient volume control for all Genelec loudspeakers. The control has a Y-style cable that splits into standard 3.5mm male and female connectors for audio input and output, providing compatibility with a variety of computers, MP3 players, gaming devices, and more.
Genelec 8010A Bi-Amplified Active Monitor (Single, Producer Finish)
Styled in what the manufacturer has dubbed Producer Finish, the Genelec 8010A Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure. The monitor utilizes Genelec s Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.
The amplifiers utilize Genelec s Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly. A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.
Genelec 7040A Studio Subwoofer
Provided here in a dark gray producer finish, the Genelec 7040A Studio Subwoofer is a studio subwoofer designed to provide accurate low-frequency reproduction in limited production spaces. Its small footprint suits project studios, mobile vans, and portable recording systems.
This sub is the ideal complement to Genelec 8010A and 8020A monitors. It extends the low-frequency response down to 30 Hz, and uses Genelec s patented Laminar Spiral Enclosure (LSE) technology to provide both precise bass articulation and extended low-frequency capacity. When used in a stereo system, the sub can produce 100 dB of undistorted SPL by means of its 6.5" woofer, and its powerful Class-D amplifier.
Built-In Bass Management
Balanced XLR connectors are used for the audio inputs and outputs. There are two input connectors and two outputs. The bass-management unit in the 7040A subwoofer splits the input into low- and high-frequency components at 85 Hz. Frequencies below 85 Hz are reproduced by the subwoofer. Frequencies above 85 Hz are directed via the subwoofer s output connectors to the main monitors. The subwoofer s outputs have the same level as the inputs.
Adjustable Sensitivity
The subwoofer sensitivity can be adjusted from +12 to -6 dBu to match the subwoofer sound level easily with different monitors.
Variable Bass Roll-Off & Phase
Two BASS ROLL-OFF switches provide bass-response adjustment to compensate for the acoustical environment in three 2 dB steps. Two switches allow alignment of subwoofer phase with the monitors. The phase can be adjusted in 90-degree increments between 0 and -270° .
Genelec 9000A Stereo Volume Control (Mystic Black)
The 9000A Stereo Volume Control (Mystic Black) from Genelec is a compact stereo volume control unit that provides convenient volume control for all Genelec loudspeakers. The control has a Y-style cable that splits into standard 3.5mm male and female connectors for audio input and output, providing compatibility with a variety of computers, MP3 players, gaming devices, and more.
Note:
A converter cable (sold separately) may be needed for connecting to equipment that has RCA and/or XLR connectors.
Compact design provides convenient volume control for all Genelec loudspeakers
Standard 3.5mm I/O connectors provide wide compatibility with various audio devices
Genelec 8010A Bi-Amplified Active Monitor (Single, Producer Finish) Specs
| Monitor Type & Configuration | Active 2-Way |
| Number of Included Monitors | Single Monitor |
| Enclosure | Bass-Reflex/Ported |
| Total Power Output | 50 W |
Drivers
| Tweeter | 1 x 0.7" / 19 mm Metal Dome |
| Woofer | 1 x 3" / 7.6 cm Cone |
| Amplifiers | HF: 1 x 25 W Class-D LF: 1 x 25 W Class-D |
Performance
| Frequency Range | 67 Hz to 25 kHz (at -6 dB) |
| Frequency Response | 74 kHz to 20 kHz ± 2.5 dB |
| Maximum Sound Pressure Level (SPL) | 105 dB (Peak) 91 dB (Continuous) |
| THD+N | < 0.08% |
| Analog Input Sensitivity/Gain | -10 to 0 dB |
| Self-Generated Noise | Less Than 5 dBA (at 3` / 1 m) |
Signal Processing
| EQ | LF Shelf: -4 dB at 200 Hz LF Tilt: 0 to -6 dB at 100 Hz (2 dB Increments) |
| Filters | None |
| Parametric EQ | None |
| Crossover Frequency | 3 kHz |
| Phase Adjustment | None |
Connectivity
| Audio I/O | 1 x XLR 3-Pin Balanced Input (7 Kilohms) |
| Network I/O | None |
| USB | None |
| Wireless | None |
Power
| AC Input Power | 100 to 240 VAC, 50/60 Hz |
| Power Consumption | 30 W (Maximum) 5 W (Idle) 0.5 W (Standby) |
| Color | Producer Gray |
| Enclosure Material | Aluminum |
| Fan-Cooled | No |
| Dimensions (W x H x D) | 4.8 x 7.7 x 4.5" / 12.1 x 19.5 x 11.5 cm |
| Weight | 3.3 lb / 1.5 kg |
Packaging Info
| Package Weight | 4.4 lb |
| Box Dimensions (LxWxH) | 12.3 x 6.6 x 6" |
Genelec 7040A Studio Subwoofer Specs
| Monitor Type & Configuration | Active Subwoofer |
| Number of Included Monitors | Single Monitor |
| Enclosure | Bass-Reflex/Ported |
| Total Power Output | 50 W |
Drivers
| Subwoofer | 1 x 6.5" / 16.5 cm Cone |
| Amplifiers | Subwoofer: 1 x 50 W Class-D |
Performance
| Frequency Range | 33 Hz to 85 Hz ± 3 dB |
| Maximum Sound Pressure Level (SPL) | 100 dB |
| THD+N | 0.8% |
| Analog Input Sensitivity/Gain | +12 dBu to -6 dBu (Continuously Variable) |
| Protections and Limiting | Thermal Limiting |
Signal Processing
| Crossover Frequency | High-Pass: 85 Hz Low-Pass: 35 Hz |
| Phase Adjustment | 4-Position Switch |
Connectivity
| Audio I/O | 2 x XLR 3-Pin Balanced Input (10 Kilohms) |
| Network I/O | None |
| USB | None |
| Wireless | None |
Power
| AC Input Power | 100 to 140 VAC, 50/60 Hz |
| Power Consumption | 5 W (Idle) 70 W (Maximum) |
| Color | Black |
| Dimensions (W x H x D) | 13.8 x 16.1 x 8.1" / 350 x 410 x 205 mm |
| Weight | 24.9 lb / 11.3 kg |
Packaging Info
| Package Weight | 29 lb |
| Box Dimensions (LxWxH) | 20 x 16 x 11" |
Genelec 9000A Stereo Volume Control (Mystic Black) Specs
| Cable Length | 6.6` (2 m) (overall) |
| Connectors | 1 x 3.5mm mini input 1 x 3.5mm mini output |
| Dimensions | 2.1 x 1.6" (60 x 42 mm) |
| Weight | 11.5 oz (325 g) |
Packaging Info
| Package Weight | 0.785 lb |
| Box Dimensions (LxWxH) | 4.55 x 4.4 x 1.85" |
In the Box
- Power Cable
- 2-Year Manufacturer Warranty
- Power Cord
- 2-Year Manufacturer Warranty
Registration Extension: 3-Year
No posts found
