Genelec 7050C - 130W 8" Active Studio Subwoofer
Building upon the success of the 7050A and 7050B models, the Genelec 7050C Studio Subwoofer is an 8" , 130W active subwoofer, well suited for discerning professionals in music, post, film, and broadcast. The 7050C boasts several improvements including a bypassable onboard bass management system, lower distortion, a universal mains voltage switched-mode power supply, and an increased maximum SPL of 103 dB.
The subwoofer works in stereo or 5.1 channel configurations using analog XLR inputs and outputs. The integrated bass management section features five input and output channels with 85 Hz low-pass/high-pass filters, plus a discrete 120 Hz LFE signal input with selectable +10 dB boost.
The 7050C utilizes a magnetically shielded low frequency driver, housed in a Genelec LSE spiral enclosure, which delivers an extended low-frequency response down to 24 Hz with low distortion. Rear panel DIP switches to allow the user to adjust subwoofer phase and low-frequency roll-off, engage the +10 dB LFE level, and activate and control the sensitivity of the Intelligent Signal Sensing (ISS) power-saving mode, which reduces the units power consumption down to a mere 0.5 W in standby mode. The Genelec 7050C ships with a standard IEC power cord.
- Laminar Spiral Enclosure (LSE) technology
- Bass management system
- Optimized amplifiers
- Room response compensation
- Protection circuitry
- Active crossovers
Genelec 8030C 5" 2-Way 100W Active Studio Monitor (Single, Producer Finish) Specs
Monitor Type & Configuration | Active 2-Way |
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported, Shielded |
Total Power Output | 100 W |
Drivers
Tweeter | 1 x 0.75" / 19 mm Metal Dome |
Woofer | 1 x 5.13" / 13.03 cm Cone |
Amplifiers | HF: 1 x 50 W Class-D LF: 1 x 50 W Class-D |
Performance
Frequency Range | 47 Hz to 25 kHz (at -6 dB) |
Frequency Response | 54 Hz to 20 kHz ± 2 dB |
Maximum Sound Pressure Level (SPL) | 110 dB |
Total Harmonic Distortion (THD) | ‰¤0.05% |
Analog Input Sensitivity/Gain | -6 dBu (Continuously Variable) |
Self-Generated Noise | Less Than 5 dBA (at 3.28` / 1 m) |
Signal Processing
EQ | 1 x LF Tilt: -6 to 0 dB at 100 Hz (2 dB Increments) 1 x LF Shelf: -4 to 0 dB at 55 Hz 1 x HF Tilt: -4 to +2 dB at 15 kHz |
Crossover Frequency | 3 kHz |
Connectivity
Audio I/O | 1 x XLR 3-Pin Balanced Input (10 Kilohms) |
Network I/O | None |
USB | None |
Wireless | None |
Power
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 0.5 W (Standby) 3 W (Idle) 60 W (Maximum) |
Color | Producer Gray |
Enclosure Material | Aluminum |
Dimensions (W x H x D) | 7.4 x 11.8 x 7" / 18.8 x 30 x 17.8 cm |
Weight | 11.0 lb / 5.0 kg |
Packaging Info
Package Weight | 13.75 lb |
Box Dimensions (LxWxH) | 17.3 x 11.8 x 11.7" |
Genelec 7050C - 130W 8" Active Studio Subwoofer Specs
System Specifications
Frequency Response | Lower Cut-Off Frequency (-6 dB): 24 Hz Upper Cut-Off Frequency (-6 dB) Main Channels / LFE: 85 Hz / 120 Hz |
Driver | 8.0" / 205 mm magnetically shielded |
THD | Harmonic distortion at 90 dB SPL at 1 m on axis in half space (30 - 85 Hz) 2nd: ‰¤4% 3rd: ‰¤1% |
SPL | Maximum Short Term Sine Wave SPL Output Averaged from 30 to 85 Hz, Measured in Half Space at 1 m: 103 dB |
Noise | Self-Generated Noise Level in Half Space at 1 m / 3.3` on Axis (A-Weighted): ‰¤5 dB |
Amplifier
Power | Amplifier Short Term Output Power (Long Term Output Power is Limited by Driver Unit Protection Circuitry): 130 W |
THD | Amplifier System THD at Nominal Output: ‰¤0.05 % |
Power Supply | 100 to 240 VAC, 50/60 Hz universal |
Power Consumption | Standby, ISS active: ‰¤0.5 W Idle: 11 W Full Output: 150 W |
Crossover
Filter | Subsonic Filter (18 dB/Octave) Below: 24 Hz |
Input Channels | 5 + LFE |
Low Pass Filter | Low-Pass Frequency for Inputs 1-5: 85 Hz Low-Pass Frequency for LFE IN Input: 120 Hz |
Connectors | Inputs: 6 x XLR (5 x inputs + LFE input) Output: 5 x XLR |
Input Impedance | 10 kOhms balanced |
Rejection | Mid-Band Rejection >400 Hz: ‰¥50 dB |
High Pass Crossover | High-Pass Frequency for Outputs 1-5: 85 Hz |
Output Gain | 0 dB |
LF Roll Off | Bass Roll-Off Control in 4 dB Steps: 0 to -12 dB @ 26 Hz |
Phase Control | Phase Matching Control in 90° Steps: 0 to -270° |
Input Sensitivity | Input Sensitivity Control: +12 to -6 dB |
Input Sensitivity (Selectable) | LFE Input Sensitivity Control: 0 or +10 dB selectable |
Dimensions | 16.1 x 13.8 x 12.6" / 410.0 x 350.0 x 319.0 mm |
Weight | 38.1 lb / 17.3 kg |
Packaging Info
Package Weight | 42.85 lb |
Box Dimensions (LxWxH) | 19.5 x 17 x 16" |
In the Box
- Iso-Pod Isolation Stand
- Power Cable
- 2-Year Manufacturer Warranty
- Mains Cable
- 2-Year Warranty, Extended to 5-Years with Registration
No posts found