Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Quested 3-Way 10 Mid-Field / Main System Powered Reference Monitor
The V3110 3-Way 10 Mid-Field / Main System Powered Reference Monitor is Quested s highest-rated self powered monitoring system. The combination of Class A/B and D amplifiers provides the V3110 with 1000 watts of continuous RMS tri-amped power.
The monitor utilizes a 3-way speaker design with low frequency response down to 30 Hz from its custom designed, linear-travel, long throw 10 driver. The high frequency tweeter and mid range speakers are designed with Quested s low-fatigue soft-dome technology, and are capable of adjusting for either horizontal or vertical positioning. A24 dB / Octave crossover slope delivers improved drive unit efficiency.
The speaker monitor features user adjustable low, mid and high frequency filters. LEDs are provided to indicate power on/off, overload and thermal protection status. The V3110 was engineered to deliver a versatile, high power density in a reference monitor cabinet with a minimal footprint and size.
Quested s highest-rated self-powered monitoring system
3-way design with low frequency response down to 30 Hz from linear travel, long throw 10 driver
1000 Watt RMS from combination of Class A/B and Class D amplification
Quested low-fatigue soft-dome high-frequency and mid-range technology
Adjustable HF / Mid section to accommodate versatile horizontal or vertical positioning
Current-driven, floating drive stage Class A/B power for HF and Mid drivers
Dedicated 700 Watt RMS Class D amplifier for improved LF driver dynamics
24 dB/octave crossover slopes for improved drive unit efficiency
Very high-power density for cabinet footprint and size
The V3110 3-Way 10 Mid-Field / Main System Powered Reference Monitor is Quested s highest-rated self powered monitoring system. The combination of Class A/B and D amplifiers provides the V3110 with 1000 watts of continuous RMS tri-amped power.
The monitor utilizes a 3-way speaker design with low frequency response down to 30 Hz from its custom designed, linear-travel, long throw 10 driver. The high frequency tweeter and mid range speakers are designed with Quested s low-fatigue soft-dome technology, and are capable of adjusting for either horizontal or vertical positioning. A24 dB / Octave crossover slope delivers improved drive unit efficiency.
The speaker monitor features user adjustable low, mid and high frequency filters. LEDs are provided to indicate power on/off, overload and thermal protection status. The V3110 was engineered to deliver a versatile, high power density in a reference monitor cabinet with a minimal footprint and size.
Quested s highest-rated self-powered monitoring system
3-way design with low frequency response down to 30 Hz from linear travel, long throw 10 driver
1000 Watt RMS from combination of Class A/B and Class D amplification
Quested low-fatigue soft-dome high-frequency and mid-range technology
Adjustable HF / Mid section to accommodate versatile horizontal or vertical positioning
Current-driven, floating drive stage Class A/B power for HF and Mid drivers
Dedicated 700 Watt RMS Class D amplifier for improved LF driver dynamics
24 dB/octave crossover slopes for improved drive unit efficiency
Very high-power density for cabinet footprint and size
Quested V3110 Specs
General
| Drivers | Low Frequency: 1 x 10" (25.40 cm) Mid Frequency: 1 x 3" (7.62 cm) High Frequency: 1 x 1.125" (2.86 cm) |
| Maximum SPL | 120 dB |
| Frequency Response | 30 Hz to 20 kHz, +/- 2 dB |
| Power Voltage | Factory set. Nominal 115 V or 230 V @ 50-60 Hz AC |
Input
| Connectors | XLR Female and 1/4" Jack combo |
| Impedance | 10 k ohm / Electronically balanced, RF filtered |
| Wiring | Pin 1: Ground / Sleeve Pin 2: Hot / Tip Pin 3: Cold / Ring |
| Sensitivity | Rear-mounted 10 position rotary switch Calibrated in 2 dB steps |
Filters
| Low Frequency EQ | User, 4-position: -6 dB selector (for use with subwoofers) 0/+3/+4 dB |
| Mid Frequency EQ | User, 3-position selector: -1/0/+1 db |
| High Frequency EQ | User, 3-position selector: -1/0/+1 db |
Power Amplifier
| Low Frequency Output | 700 watts RMS continuous |
| Mid Frequency Output | 150 watts RMS continuous |
| High Frequency Output | 150 watts RMS continuous |
| THD | >0.03% at levels up to 1 dB below clipping 20 Hz to 20 kHz Typical 0.005% at 20 watts/RMS @ 1 kHz |
| Hum & Noise | >-100 dB referred to clipping |
Indicators
| Power On Mode | Front blue LED indicates Power On Flashes during warm-up cycle |
| Overload | Front LED flashes red Indicating B below signal clipping |
| Thermal Protection | Front LED turns red, signal is muted Amplifier switches to Standby during thermal protection cooling cycle |
Dimensions & Weight
| Dimensions | 14.96 x 23.62 x 14.17" (380 x 600 x 360 mm) |
| Weight | 85.98 lb (39 kg) |
In the Box
- Quested 3-Way 10" Mid-Field / Main System Powered Reference Monitor
No posts found
