EAN: 692465002103
The MultiDirector from Whirlwind is a four channel direct box that converts an unbalanced line, instrument or speaker level signal to low impedance balanced microphone level, which is then suitable for imputing to a console or microphone preamp.
Each of the four individual channels has three standard 1/4` unbalanced, high impedance bridging jacks for connection to instruments and amplifiers. All are wired in parallel and can be used in any combination for input and through connections. Two are located on the rear panel with the third on the front.
The unit is a passive device and therefore requires no external power supply. The unit features a ground lift switch and a 20dB pad for selecting between line/instrument or speaker level signals.
Four channel passive DI for studio or stage use
1/4` parallel wired in/out jacks
20dB pad switch for selecting between line/instrument or speaker level input signals
Ground Lift switch per channel to help eliminate hum and buzz
Whirlwind MLTDIR Specs
| Input Connections | 12 x 1/4" TS phone (shared with outputs) |
| Output Connectors | 4 x XLR 12 x 1/4" TS phone (shared with outputs) |
| Input Level | Not specified by manufacturer |
| Output Level | 20dB below input level (-40dB with pad engaged) |
| Frequency Response | 20Hz to 20kHz, +/-1dB |
| Noise | Not specified by manufacturer |
| Power | Passive |
| Dimensions | 19 x 5-1/4 x 1-3/4" (483 x 133 x 45 mm) |
| Weight | 5 lbs (2.3 kg) |
| Specialties | Uses Whirlwind`s TRHL-M transformer with metal shield |
Packaging Info
| Package Weight | 6.45 lb |
| Box Dimensions (LxWxH) | 21.4 x 9.4 x 4.8" |
In the Box
- Whirlwind MultiDirector - 4 Channel Studio or PA Direct Box with 20dB Pad
- 5-Year Manufacturer Warranty
No posts found
