Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
EAN: 728736036512
This ATT-448 In-Line Switchable Input Attenuator XLR Barrel from Hosa is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion.
EAN: 728736036512
This ATT-448 In-Line Switchable Input Attenuator XLR Barrel from Hosa is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion.
The ATT-448 attenuator is placed in-line between the microphone and the board, and you can switch on the appropriate amount of attenuation. The choices are 20, 30, or 40 dB of signal reduction, for a wide range of uses on stage and in the studio.
The unit accepts 3-pin male and female XLR connectors.
Provides 20, 30, or 40 dB of microphone attenuation
For use with all low-impedance and phantom-powered condenser microphones
XLR input and output
Magnetically shielded case
Hosa Technology ATT-448 Specs
General
| In-Line Accessory Type | Attenuator/Pad |
| Input / Output Level | Input: Mic Level Output: Mic Level |
| Number of Channels | 1 |
| Attenuation | -20 dB / -30 dB / -40 dB (Selectable) |
| Controls | 1 x Pad Switch |
Connectivity
| Inputs/Outputs | 1 x XLR 3-Pin Female 1 x XLR 3-Pin Male |
Packaging Info
| Package Weight | 0.125 lb |
| Box Dimensions (LxWxH) | 9.65 x 3.95 x 0.75" |
In the Box
- Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
No posts found
