Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier
EAN: 819032011560
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
EAN: 819032011560
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
With a sophisticated Class-A design and high-grade FETs, the DM1 has a low self noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design, ensuring reliable operation for onstage applications in difficult environments.
sE Electronics DM1 Specs
General
| In-Line Accessory Type | Pre-Amplifier |
| Input / Output Level | Input: Mic Level Output: Mic Level |
| Number of Channels | 1 |
| Gain | +28 dB (1-Kilohm Load) |
| Circuit Type | Class-A FET |
| Controls | None |
Connectivity
| Inputs/Outputs | 1 x XLR 3-Pin Female Input 1 x XLR 3-Pin Male Output |
Performance
| Frequency Response | 10 Hz to 120 kHz -0.3 dB |
| Impedance | 135 Ohms |
| Load Impedance | 1 Kilohms (Minimum) |
| Max Output Level | +8.3 dBV (0.5% THD) |
| Noise | Output Noise: 30 dBm (JIS-A) |
Power
| Operating Voltage | 48 V (Phantom Power) |
| Operating Current Consumption | 3.0 mA |
Physical
| Dimensions | 0.75 x 3.76" / 1.91 x 9.55 cm |
| Weight | 2.8 oz / 79.9 g |
Packaging Info
| Package Weight | 0.22 lb |
| Box Dimensions (LxWxH) | 14.4 x 2.85 x 1.25" |
In the Box
- sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier
- 2-Year Manufacturer Warranty
No posts found
