Audio-Technica AT2035 Cardioid Condenser Microphone
A Versatile & Cost-Effective Mic Solution
Balancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that`s accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.
Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.
AT2035 Samples from Audio Test Kitchen
- is proud to be partnering with Audio Test Kitchen, the worlds most comprehensive online audio product comparison platform, to improve the resources provided to our customers shopping for the right microphone for their given application.
- This provides you with the ability to listen to a growing selection of microphones with spoken word recordings captured in a standardized environment, with levels matched by the talented engineers at Audio Test Kitchen in its impressive reference studio.
- Audio Test Kitchen records microphones under identical conditions so you can compare them, apples-to-apples. The source, signal chain, and level never change. The only differences you will hear are between the microphones.
At Home or Onstage
Designed for critical home/project studio applications and live performance, this side-address cardioid condenser delivers detailed sonics and low noise. With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.
Selectable Settings
Equipped with a switchable 80 Hz high-pass filter and -10 dB pad, the AT2035 easily handles high sound pressure levels (up to 158 dB) and avoids the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically coupled vibrations.
Ready for Daily Use
Along with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.
Features at a Glance
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
- Switchable 80 Hz high-pass filter and -10 dB pad
- Custom shockmount provides superior decoupling from vibrations
- Operates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
- Balanced XLR 3-pin output connector
Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black)
Bringing the acclaimed features of the M-Series headphones to a price point that`s accessible for all, the black Audio-Technica ATH-M20x monitor headphones offer solid build quality and audio performance for musicians and content creators recording and mixing at home. Outfitted with 40mm dynamic drivers and an over-ear, closed-back design, the ATH-M20x headphones deliver enhanced bass response and wide bandwidth (15 Hz to 20 kHz) while isolating you from outside sounds.
Thanks to the 15° swiveling earcups, high-quality materials, and generous cushioning on the headband and earpads, the headphones are both durable and comfortable to wear. Exiting from the left earcup, the attached 9.8` cable reduces tangles and simplifies channel identification. The cable sports a 3.5mm mini plug for use with mobile devices and computer soundcards, and a 1/4" snap-on adapter is included for easy hookup to audio interfaces, mixers, and stereo receivers.
40mm Drivers
The ATH-M20x features 40mm dynamic drivers with rare earth (neodymium) magnets and CCAW (copper-clad aluminum wire) voice coils for quality sound reproduction at a competitive price point.
Tuned for Enhanced Bass Response
The drivers and headphone design work together to provide a sonic signature tuned for enhanced bass performance. With a frequency response of 15 Hz to 20 kHz, the ATH-M20x can reproduce a full spectrum of tones.
Over-Ear, Sound-Isolating Design
The ATH-M20x utilizes a circumaural design that contours around the ears for excellent sound isolation in loud environments. This over-ear, closed-back style is optimal for reducing bleed and separating you from outside sounds.
15° Swiveling Earcups
Equipped with 15° swiveling earcups, the ATH-M20x ensures a great fit.
Attached Single-Sided Cable
Keeping it simple and clean, the ATH-M20x incorporates an attached 9.8` cable that exits from the left side. This increases convenience and makes it easier to distinguish the different sides of the headphone.
3.5mm Plug and 1/4" Snap-On Adapter
The attached cable is terminated with a straight 3.5mm TRS mini plug for easy hookup to mobile devices, MP3 players, and computer headphone jacks. A 1/4" snap-on adapter is included for compatibility connectivity with audio interfaces, mixers, and dedicated headphone amplifiers.
Solid Build Quality
Thanks to the high-quality materials used in the ATH-M20x, the headphones balance comfort and strength while delivering enhanced audio and effective isolation.
Senal XU-1648 XLR-USB Interface
The XU-1648 from Senal is a compact XLR-to-USB adapter interface that allows you to plug your microphone into the USB port of any Mac or Windows computer for use with your favorite digital recording software. Its rugged build and plug-and-play operation make it perfect for bands, recording artists, podcasters, and more.
For use with dynamic or condenser microphones, the XU-1648 delivers 16-bit / 48-kHz studio-quality sound. It also features a microphone preamp with gain control and switchable 48V phantom power. Its 3.5mm headphone output features a volume control and allows for zero-latency monitoring. There is also a monitor level control to adjust the balance between the audio playback from your computer and the sound of your microphone.
In addition, the XU-1648 features a tough, all-metal chassis with nonslip neoprene feet on the bottom to prevent it from slipping.
Plug-and-play XLR-to-USB adapter
Rugged metal chassis
16 bit / 48 kHz studio-quality sound
Low-noise mic preamp with gain control
3.5mm latency-free headphone output with level control
Monitor output adjusts balance between audio playback and live mic
Peak-level indicator to help avoid clipping
USB bus powered
6.3` USB cable included
EAN: 847628569874
512 AUDIO Microphone Pop Filter with Gooseneck C-Clamp
Placed in front of your favorite vocal mic, the 512-Pop Microphone Pop Filter from 512 AUDIO delivers improved recording quality for any mic by reducing commonly problematic sounds from strong p and f consonants, making it a welcome accessory for recording podcasts, voiceovers, and vocal performances.
Its metal mesh design is visually pleasing and sonically effective while being easier to clean and more rugged than traditional nylon pop filters. Via the adjustable swivel C-clamp, the 512-Pop securely attaches to any boom arm or mic stand. The inclusion of a flexible and sturdy gooseneck ensures problem-free positioning of the pop filter.
Cleaner Sound
By preventing intrusive pop
Audio-Technica AT2035 Cardioid Condenser Microphone Specs
Microphone
Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Electret Condenser |
Polar Pattern | Cardioid |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
Windscreen | None |
Performance
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 148 dB SPL (1 kHz, 1% THD) 158 dB SPL (1 kHz, 1% THD, with Pad) |
Impedance | 120 Ohms |
Sensitivity | -33 dBV/Pa |
Dynamic Range | 136 dB (1 kHz, at Max SPL) |
Signal-to-Noise Ratio | 82 dB (1 kHz) |
Equivalent Noise Level | 12 dB SPL A-Weighted |
Connectivity
Headphone Connector | None |
Power
Operating Voltage | 11 to 52 V (Phantom Power) |
Operating Current Consumption | 3.8 mA |
Physical
Color | Black |
Mounting | Shockmount (Included) |
Included Case | Pouch |
Included Filters | None |
Dimensions | .: 2.05 x L: 6.69" / .: 5.21 x L: 16.99 cm |
Weight | 14.2 oz / 403 g |
Packaging Info
Package Weight | 1.905 lb |
Box Dimensions (LxWxH) | 10.65 x 10.6 x 3.25" |
Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black) Specs
Headphone
Earpiece Design | Over-Ear (Circumaural), Closed-Back |
Earpiece Swivel | Yes, 15° |
Earpiece Connection / Wearing Style | Headband |
Foldable | No |
Driver Type | Dynamic |
Driver Size | 1.6" / 40 mm |
Magnet Type | Neodymium |
Voice Coil | Copper-Clad Aluminum Wire |
Impedance | 47 Ohms |
Active Noise Cancellation | No |
Performance
Frequency Response | 15 Hz to 20 kHz |
Sensitivity | 96 dB |
Maximum Power Handling | 700 mW |
Wired Connectivity
Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Male Straight |
Adapter (Included) | 1/4" TRS |
Cable Design | Single-Sided |
Audio Connector to Earpiece | Not Specified by Manufacturer |
Cable Length | 9.8` / 3 m |
Cable Color | Black |
Physical
Color | Black |
Weight | 6.7 oz / 190 g (without Cable) |
Packaging Info
Package Weight | 1.45 lb |
Box Dimensions (LxWxH) | 11.5 x 10.3 x 4.15" |
Senal XU-1648 XLR-USB Interface Specs
Form Factor | Inline Adapter |
Display | None |
Channels of I/O | 1 Input at 48 kHz |
Maximum Sampling Rate | 48 kHz / 16-Bit |
Number of Microphone Preamps | 1 Preamp |
Expansion Slots | None |
Signal Processing
Gain/Trim Range | Inputs: 35 dB |
Connectivity
Analog Audio I/O | 1 x XLR 3-Pin Mic Input 1 x 1/8" / 3.5 mm TRS Headphone Output |
Phantom Power | 48 V ± 2 V |
Phantom Power Current | 15 mA per Channel |
Digital Audio I/O | None |
Host Connection / USB | USB-B |
Host Connection Protocol | USB 2.0 |
USB (Non-Host) | None |
Sync I/O | None |
Network I/O | None |
MIDI I/O | None |
Wireless Connectivity | None |
Performance
Frequency Response | 25 Hz to 20 kHz |
Headphone Output Power | 50 mW into 16 Ohms |
Impedance | Inputs: 1.2 Kilohms |
In the Box
- Audio-Technica AT2035 Cardioid Condenser Microphone
- Audio-Technica ATH-M20x Closed-Back Monitor Headphones (Black)
- Boom Arm
- 2-Year Manufacturer Warranty
- 6.25` (1.9m) USB Cable
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found