The Audio-Technica AT2041SP is a recording microphone package configured to suite any recording budget. The package consists of the AT2020 cardioid condenser microphone and AT2021 small-diaphragm condenser recording microphone.
The combination of the two microphones provide the flexibility to accurately record vocals and instruments in project and home recording studios. The microphones exhibit a wide frequency response and cardioid polar patterns for accurate detail and minimal residual noise.
AT2020 Studio Condenser
The AT2020 is a side address large diaphragm condenser that`s well suited for vocal capturing.
AT2021 Small-Diaphragm Condenser
The AT2021 small diaphragm condenser microphone captures instruments in rich detail and minimal noise.
Professional Mounting
The AT2020 includes a pivoting, threaded stand mount while the AT2021 includes a professional stand clamp.
EAN: 042005140039
Audio-Technica AT2041SP Specs
| Transducer | Fixed-charge back plate permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | AT2021: 30Hz to 20kHz AT2020: 20Hz to 20kHz |
| Dynamic Range (Typical) | AT2021: 126dB SPL, 1kHz @ Max SPL AT2020: 142dB, 1 kHz @ Max SPL |
| Signal-to-Noise Ratio | AT2021: 75dB, 1 kHz @ 1 Pa AT2020: 74dB, 1 kHz @ 1 Pa |
| Maximum Input Sound Level | AT2021: 145dB SPL, 1 kHz @ 1% T.H.D. AT2020: 144dB SPL, 1 kHz @ 1% T.H.D. |
| Power Requirements | 48V DC, 2mA typical |
| Output Impedance | 48V Phantom Power |
| Output Connectors | 3-pin XLR-male |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | AT2021: 4 x .83" (101.5 x 21mm) (Length x Diameter) AT2020: 6.38 x 2.05" (162 x 52mm) (Length x Diameter) |
| Weight | AT2021: 2.9 oz (83 g) AT2020: 12.1 oz (345 g) |
Packaging Info
| Package Weight | 2.27 lb |
| Box Dimensions (LxWxH) | 9.75 x 9.65 x 3.1" |
In the Box
- Audio-Technica AT2041SP Cardioid Condenser Studio Microphone Package
- Pivoting Mount for AT2020
- Stand Clamp for AT2021
- 2 x Protective Carrying Pouches
Not in the Box
- Essential XLR Cables (Not Included)
No posts found
