The CORE Sub from Dynaudio is a professional subwoofer for mixing applications, one meant to be use with the company`s CORE series of monitors. This subwoofer digs down to 15 Hz with a low-frequency roll-off of -6 dB at 13.5 Hz. It does this while rattling the bones at 120 dB if need be.
All of this is made possible by high-quality construction that includes two 500W Pascal Class-D woofer amplifiers and four individual 9` woofers. With AES as well as analog connections, the unit affords you the ability to run 3 subwoofers in tandem with any CORE system. You`ll even note the indents on top of the sub, designed for your CORE speakers to sit on top of. If you need deep lows and fast transient accuracy out of your CORE monitoring system, this is the subwoofer to use.
Hand-Crafted Design
Designed, developed, tested and made in Denmark.Alll the drivers are hand-made at Dynaudio HQ, and each speaker is individually calibrated before it leaves the factory.
High-Quality Materials
Core Sub uses new Dynaudio MSP+ Hybrid Drive units, made with MSP and aluminium, designed specifically for subwoofers. Dual-action damping ensures tight, controlled bass.
Advanced DSP
The sub uses the same DSP engine you`ll find in the rest of the Core range, so you can customize its response to its position in the room for seamless consistency and integration
Configurable
Use as many Subs as you need with your Core speakers. Stack them in neat arrays or even mount them on walls. Core Sub aligns physically and electronically with your studio
Dynaudio Acoustics CORE Sub Specs
Monitor Type & Configuration | Active Subwoofer |
Number of Included Monitors | Single Monitor |
Enclosure | Sealed |
Total Power Output | 500 W |
Drivers
Subwoofer | 2 x 9" / 22.9 cm Cone |
Amplifiers | Subwoofer: 2 x 500 W Class-D |
Performance
Frequency Range | 15 Hz to 165 Hz ± 3 dB 13.5 Hz to 200 Hz (-6 dB) |
Maximum Sound Pressure Level (SPL) | 120 dB |
Signal Processing
Maximum Sampling Rate | 192 kHz / 24-Bit |
Connectivity
Audio I/O | 1 x XLR 3-Pin Balanced Input |
Digital Audio I/O | 1 x XLR 3-Pin AES3 Input 1 x XLR 3-Pin AES3 Output 1 x BNC Coaxial AES3 Input |
Network I/O | None |
USB | None |
Wireless | None |
Power
AC Input Power | Not Specified by Manufacturer |
Physical
Color | Black |
Enclosure Material | Aluminum |
Dimensions (W x H x D) | 15.4 x 20.2 x 14.4" / 390 x 514 x 365 mm |
Weight | 105.8 lb / 48.0 kg |
In the Box
- Dynaudio Acoustics CORE Sub 9" Subwoofer for CORE Monitoring Systems (Black)
- Power Cord
- 2-Year Warranty
No posts found