Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Genelec 8020D Studio Monitor (Raw Finish)
Styled in a raw finish and utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4` Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec`s Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its A¾` tweeter, and a 50W low-frequency amplifier for its 4` woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shielded
Styled in a raw finish and utilizing Class-D amplification, the Genelec 8020D Active Two-Way 4` Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec`s Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its A¾` tweeter, and a 50W low-frequency amplifier for its 4` woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shielded
Genelec 8020D Specs
| Monitor Type & Configuration | Active 2-Way |
| Number of Included Monitors | Single Monitor |
| Enclosure | Bass-Reflex/Ported, Shielded |
| Total Power Output | 100 W |
Drivers
| Tweeter | 1 x 0.75" / 19.1 mm Metal Dome |
| Woofer | 1 x 4" / 10.2 cm Cone |
| Amplifiers | HF: 1 x 50 W LF: 1 x 50 W |
Performance
| Frequency Response | 62 Hz to 20 kHz ± 2.5 dB |
| Maximum Sound Pressure Level (SPL) | 107 dB |
| Total Harmonic Distortion (THD) | 0.05% |
| THD+N | < 0.05% |
| Maximum Input Level | +24 dBu |
| Analog Input Sensitivity/Gain | +36 to -6 dBu (Continuously Variable) |
| Self-Generated Noise | Less Than 5 dBA (at 3` / 1 m) |
| Protections and Limiting | Driver Protection |
Signal Processing
| EQ | 1 x LF Shelf: -4 to 0 dB at 65 Hz 1 x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz 1 x HF Tilt: -2 to 0 dB at 15 kHz |
| Crossover Frequency | 3 kHz |
Connectivity
| Audio I/O | 1 x XLR 3-Pin Balanced Input (10 Kilohms) |
| Network I/O | None |
| USB | None |
| Wireless | None |
Power
| AC Input Power | 100 to 240 VAC, 50/60 Hz |
| Power Consumption | 0.5 W (Standby) 3 W (Idle) 60 W (Maximum) |
| Color | Raw Silver |
| Dimensions (W x H x D) | 6 x 9.5 x 5.6" / 151 x 242 x 142 mm |
| Weight | 7.0 lb / 3.2 kg |
Packaging Info
| Package Weight | 8.78 lb |
| Box Dimensions (LxWxH) | 14.9 x 8 x 7.5" |
In the Box
- Genelec 8020D Studio Monitor (Raw Finish)
No posts found
