The SRc5P Dual-Channel Slot-Mount ENG Receivers from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video camera receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.
Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions.
The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window also displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers.
Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of little or no RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception.
Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source. The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera-slot outputs.
Fits camera `slots,` Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera slot outputs
Dual-receiver design for two channels with phase-switched diversity or single channel with ratio diversity operation
Digital Hybrid Wireless with compatibility modes for use with other transmitters
Tracking front-end filters for high performance in tough RF environments
LCD with RF spectrum scanning
SmartSquelch DSP-controlled, noise based filtering and squelch
DSP-based pilot tone for squelch control
IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
SmartTune operation for quick and confident frequency selection
Lectrosonics SRc5P Specs
| Operating Frequencies | B1: 537.600 to 614.375 MHz |
| Frequency Selection Steps | Selectable; 100 or 25 kHz |
| Type of Receiver | Dual conversion, superheterodyne |
| IF Frequency | Ch.1: 248.450 MHz and 350.000 kHz Ch.2: 243.950 MHz and 250.000 kHz |
| Frequency Stability | ±0.001 % |
| Front End Bandwidth | 20 MHz @ -3 dB |
| Sensitivity | 20 dB SINAD: 1.0 uV (-107 dBm), A-weighted 60 dB Quieting: 2.2 uV (-100 dBm), A-weighted |
| Squelch Quieting | Greater than 100 dB typical |
| AM Rejection | Greater than 60 dB, 4 uV to 1 V |
| Modulation Acceptance | 85 kHz |
| Image and Spurious Rejection | 85 dB |
| Third Order Intercept | 0 dBm |
| Diversity Method | SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel |
| FM Detector | Digital Pulse Counting Detector operating at 250 and 350 kHz |
| RF Spectrum Analyzer | Coarse and fine scanning modes for RF spectrum site survey |
| Antenna Inputs | 50 Ohms SMA female connectors |
| Audio Output Connectors | Interchangeable D-connector adapters for camera-slot interfaces Dual TA3 male (mini XLR) balanced output adapter Balanced output adapter with fixed cables Front-panel TA5M with two balanced outputs (5P version) |
| Audio Output Level | Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower |
| Audio Channel Crosstalk | -80 dB or better |
| Front Panel Controls and Indicators | Sealed panel with membrane switches LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level |
| Audio Test Tone | 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD |
| Transmitter Battery Type Selection | 9 V alkaline, 9 V lithium, AA alkaline, AA lithium, NiMH |
| Phase Invert | Audio output phase normal or inverted |
| Compatibility Modes | HYB native Digital Hybrid mode M.3 non-Lectrosonics (call factory) 200 Lectrosonics 200 Series 100 Lectrosonics 100 Series HYB/TB Digital Hybrid w/ Talkback M.7 non-Lectrosonics (call factory) M.6 non-Lectrosonics (call factory) IFB Lectrosonics IFB |
| SmartNR (Noise Reduction) | Off, Norman, Full modes (available in Digital Hybrid mode only) |
In the Box
- Lectrosonics SRc5P Dual-Channel Slot-Mount ENG Receivers (B1: 537.600 to 614.375 MHz)
- Adjustment Tool
- 2 x Antennas
- 2 Years Manufacturer Warranty
No posts found
