Audio-Technica ATW-2129b Wireless Lavalier Microphone System Kit with Carry Bag & Accessories (Band I: 487.125 to 506.500 MHz)

Audio-Technica ATW-2129BI Overview

The Audio-Technica ATW-2129b Wireless Lavalier Microphone System Kit with Carry Bag and Accessories adds a carrying bag, 10` XLR cable, 8-pack of AA batteries, and a 3-pack of windscreens to create a portable, discreet, and easy-to-use wireless solution you can take anywhere for presentations and performances.

Audio-Technica ATW-2129b Wireless Lavalier Microphone System (Band I: 487.125 to 506.500 MHz)

The Audio-Technica ATW-2129b Wireless Lavalier Microphone System delivers professional features and wireless microphone quality, while remaining a cost effective solution for presentations, performance PA, houses-of-worship, nightclubs, restaurants, bars, and more.

The system features the ATW-R2100b receiver with UHF diversity reception, 10 user selectable frequencies, automatic frequency scan and Tone Lock squelch system for interference free reception. Balanced XLR and 1/4" phone connections adapt to professional and consumer gear, and a bright LCD display delivers a comprehensive read over settings in dimly lit conditions.

The included ATW-T210a UniPak (bodypack) transmitter features a 4-pin locking microphone input, and the AT829cW lavalier microphone is included. The microphone is small and easily clips onto clothing and accurately reproduces speech without noise and distortion.

Serious advances in affordable professional wireless

Clear sound quality and rock-solid, dependable performance

Automatic frequency scanning

10 compatible user-switchable channels in one of two UHF frequency ranges

Antenna power available for powered antennas & other in-line RF devices

True Diversity operation selects the better signal from the two receiver sections, reducing dropouts

Tone Lock tone squelch system fights interference

Rugged metal half-rack receiver with soft-touch controls and LCD display

Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear

Switchable transmitter power output with high and low settings offered

Includes rack-mount kit and detachable UHF antennas

Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

EAN: 042005191932

Auray Carrying Bag for Wireless System

Audio professionals looking for a bag to carry a wireless mic system will be impressed with the Auray WSB-1S, a lightweight padded nylon carrying bag designed to hold and protect a single microphone wireless system and accessories. The bag allows you to easily transport your audio gear to and from a shoot. The case can be carried over the shoulder while you follow the action, ensuring that you`re never out of microphone range.

The bag features a dense foam interior with precision cutouts that prevent the receiver, transmitter, microphone, and accessories from rattling around during transport. You`ll have total access to the front and rear of your receiver, allowing you to adjust audio controls and cable connectors. And there`s plenty of storage room, as well as an accessory pouch to keep your cables, batteries, lavalier mics, and mic clips organized. The lightweight nylon exterior offers protection from moisture, dust, and debris.

Fits a Single Mic Wireless System

Everything your sound engineer needs for a location shoot can be transported safely and comfortably in the Auray WSB-1S. There`s room for a receiver, bodypack transmitter, handheld microphone, and accessories, such as lavalier mics, cables, and batteries.

Foam Cutouts

The dense foam pads are custom cut to fit your important audio devices and protect them from accidental bumps and shocks while traveling and during field recordings. Your receiver, transmitter, and handheld mic will be padded and held securely in place.

Front and Rear Access

The zippered front flap keeps your transmitter, receiver, and mic protected against the elements, as well as dust and debris, until you`re ready to go to work. Then, you can unzip the flap and have complete access to the receiver`s front panel. There`s zippered access to the rear panel too, so you can run cables to and from the unit without any obstructions.

Accessory Compartment

There`s a generous accessory compartment where you can stash cables, batteries, lavalier mics, and other accessories you need for the shoot. Put them all in the included accessory pouch to keep them organized and easy to find once you`re ready to set up.

Space for Antennas

The bag is constructed with enough space in the rear compartment to accommodate a receiver`s antennas, whether they`re built in or attached separately.

Portable

Subjects can very easily move out of your microphone`s transmission range. Say you`re recording narration while your subject is hiking a trail or running up a football field. Throw the bag over your shoulder and keep up with them, so they`ll never be out of range, and you`ll get every word.

EAN: 847628040175

Kopul Studio Elite 4000 Series Neutrik XLR M to XLR F Microphone Cable (10`, Black)

The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (10`) is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces, and recorders or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well suited for critical recording and broadcast situations.

Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that`s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

98% braided shield offers protection from EMI and RFI noise.

Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable`s signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable`s core.

24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.

Cotton yarn reduces electrostatic and microphonic noise.

All solder points shrink-wrapped for protection.

Neutrik XX silver connectors offer high conductivity.

Cast zinc shell and chuck style strain relief.

EAN: 847628551176

Watson AX AA 1.5V Alkaline Batteries (8-Pack)

This convenient 8-pack of AX AA 1.5V Alkaline Batteries from Watson are a perfect everyday battery for electronic devices such as wireless game controllers, a computer mouse, and children`s toys. The batteries can be stored for up to five years and still have power when needed for powering portable electronic devices. These environmentally-friendly alkaline batteries are free from harmful chemicals such as lead, cadmium, and mercury.

EAN: 847628575622

Auray Foam Windscreen for 1/4" Diameter Microphones (3-Pack)

The Auray WLF Series Foam Windscreen (3-Pack) is designed to reduce unwanted vocal pops and broadband wind noise with minimal high frequency loss.

This WLF-014-3 Foam Windscreen is designed for use with headset and lavalier mics with a 1/4" diameter. The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound.

Whether used on headset or lavalier microphones, these windscreens are effective in minimizing wind noise and plosive sounds. They are most effective in calm to light breeze conditions (0 to 7 mph) and can be used indoors for protection against drafts caused by air conditioners. Users can generally expect a notable reduction in wind noise with very slight dampening of high frequencies. For