Comica Audio BoomX-D D2 Ultracompact 2-Person Digital Wireless Microphone System for Mirrorless/DSLR Cameras (2.4 GHz)

Designed for mobile journalists, videographers, and vloggers, the Comica BoomX-D D2 is an ultracompact, true wireless digital microphone system with two microphones and just one receiver. It offers a complete solution for recording dialogue, interviews, and speech with two people talking simultaneouslydirectly to a mirrorless/DSLR camera or a mobile device.

The ultralightweight BoomX-D D2 consists of two ultracompact clip-on transmitters each with its own built-in omnidirectional microphone and a separate lavalier microphone. It also comes with a tiny receiver that mounts on and plugs directly into your camera. Additionally, the included TRRS output cable gives you the option to plug the receiver into any smartphone equipped with a headphone jack.

The system delivers reliable transmission with a clear sound at a distance up to 164`. The built-in rechargeable batteries provide up to 5 hours of operation. Versatile and extremely easy to use with simple controls, the BoomX-D D2 is well suited for content creators of any experience level.

Two Microphones into One Receiver

• The two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from the two mic/transmitters.
• The receiver features a belt clip, which also doubles as a shoemount adapter for your camera.
• In the absence of a smartphone holder, the receiver can also be clamped to your smartphone using the belt clip.

Built-In Mics for True Wireless

• Each transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphone.
• For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent. You can also hold the transmitter in your hand and use it as a handheld microphone.
• The On/Off switch doubles as a mute button.

Lavalier Mics Included

• For a more discreet setup, use the small lavalier microphone, which can be easily concealed away from the camera`s eye.

Plug-and-Play and Easy-to-Operate Wireless

• This plug-and-play system is easy to use. It comes pre-paired at the factory; connect it to your camera, turn it On, and you`re ready to start recording.
• Dedicated gain buttons on the receiver allow quick and effortless adjustment of the signal level for each microphone independently.
• The receiver and the transmitters have a display that shows signal strength, audio level, mono/stereo configuration, and battery life.
• You have the option to switch between mono or stereo on the receiver: Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to isolate each person`s dialog and adjust each level individually later in post.
• The transmitters and the receiver are powered via a built-in lithium-ion rechargeable battery. They can also be powered via USB, even while in use, giving you near unlimited operating time.

Monitor in Real Time

• If your camera doesnt have a headphone jack, you can monitor your sound via the receivers 3.5mm headphone output while recording to ensure that you are capturing a clean signal.

Easy 2.4 GHz Digital Wireless

• Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the BoomX-D digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
• The system automatic changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 164 feet. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.