Godox WES1 Wireless Microphone System for Lightning Devices (2.4 GHz)

Godox WES Overview

Record improved audio with your Lightning compatible mobile device using the WES1 Wireless Microphone System from Godox. The system includes one clip-on transmitter with built-in omnidirectional microphone and a dual-channel plug-in receiver with male Lightning connector. Advanced noise reduction with two selectable modes on the transmitter mitigates negative effects from sudden outdoor noises. The system also includes a USB-A to USB-C data cable and one furry windscreen.

Compact Components, Plug-In Receiver

Simply plug your dual-channel receiver into your compatible mobile device of choice using the built-in male Lightning connector. The receiver weighs only 0.2 oz while the transmitter weighs only 0.4 oz each. All components also feature a female USB-C port, which can be used for charging or data delivery.

Clip-On Transmitter with Advanced Noise Reduction

An integrated omnidirectional microphone on the transmitter captures crisp audio in your next single person vlog or livestream. Onboard controls can toggle the advanced noise reduction. Use the iOS/Android mobile app to control the two different modes either weak or strong depending on your noise environment. The transmitter can capture audio with a 48 kHz/16-bit sampling rate and a maximum 110 SPL.

656.2` Transmission Distance

All the components of the WES1 system can communicate to one another from up to 656.2` away via line-of-sight 2.4 GHz technology. This transmission is resistant from interference and has a high gain.

Mobile App Control, Plug-and-Play Setup

Simply plug your receiver into your mobile device and start up the Godox mobile app to start recording. The app allows you to playback your record audio or control advanced settings like transmitter volume and noise reduction. The USB-C port on the receiver also allows you to charge your mobile device while you record.

Long Battery Life

The transmitter unit features a built-in 140mAh battery with an 8-hour runtime. Recharge the components via USB-C port in just 2 hours. The receiver runs on plug-in power from your connected device.