Wireless Audio Capture for Content Creation
Ideal for content creators recording vlogs or TikToks for social media, the Synco WAir-G1-A1-Pro is a wireless microphone system with a dual-channel receiver and a clip-on transmitter, which improves your audio quality with its built-in microphone. Record up to two subjects in your next vlog or interview directly to a device of your choice with 3.5mm input port from up to 656` away. A USB-C audio output makes the system compatible with smartphones and an included lavalier microphone can facilitate low-profile recording.
Dual-Channel Receiver and Single Transmitter
- The included dual-channel receiver can toggle between mono and stereo recording modes. Use the included transmitter to receive audio from a single participant, or expand the system with a separately available transmitter for 2-person configurations.
- The transmitter features a built-in omnidirectional microphone and a 3.5mm port for the included lavalier microphone. Built-in noise reduction technology filters out low-frequency noise when recording. A furry windscreen reduces wind interference.
- Adjusting the output volume on either device synchronizes with the other
- Both components feature integrated, magnetic back clips for attachment to your lapel.
Syncoder 3.0 Transmission
An encrypted transmission algorithm optimizes channel selection to improve signal stability and audio quality. The components can communicate from up to 656` away using this encryption.
6 dB Safe Audio Track Recording, Noise Reduction
Using the receiver`s onboard controls, record a safety channel at reduced 6 dB to avoid unforeseen audio spikes from outside factors like vehicles or weather. This saves your audio recording no matter the circumstance. Intelligent noise reduction is built-in to the units to filter out low-frequency noises.
8-Hour Runtime
Integrated lithium-ion batteries keep the system running for 8 hours at a time. An included case recharges the system in just 3.5 hours and also serves as a storage solution for on the go.
Connectivity
- A 3.5mm TRS mic output on the receiver can directly record audio to devices of your choice via the included TRS and TRRS cables.
- A 3.5mm headphone output for monitoring
- A USB-C port can charge the receiver or output audio to smartphones with the USB-C cable.
Synco WAIR-G1 Specs
System
| Wireless Technology | Digital 2.4 GHz |
| Number of RF Channel Frequencies | 3 |
| Included Transmitters | 2 x Clip-On with Microphone |
| Diversity | Non-Diversity |
| RF Frequency Band | 2400 to 2483.3 MHz |
| RF Bandwidth | 83.3 MHz |
| Max Operating Range | 656.2` / 200 m |
| Max Transmitters per Band | 2 |
| Built-In Recorder | No |
| Timecode Support | No |
| Mobile App Compatible | No *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
| Audio Codec | None |
| Encryption | Yes |
Receiver
| Receiver Type | Beltpack |
| Mounting Options | Belt Clip (with Included Hardware) |
| Number of Audio Channels | 2 |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Unbalanced Mic Output 1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output |
| Gain Range | 1 to 30 dB |
| Phantom Power Protection | None |
| Network I/O | None |
| Word Clock I/O | None |
| USB/Lightning Connectivity | 1 x USB-C Female (Audio, Charging) |
| Standalone Audio Interface Capable | No |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable |
| Internal Battery Capacity | 400 mAh |
| Battery Charging Time | 2 Hours |
| Approx. Battery Life | 5 Hours |
| Display & Indicators | 2 x LED (Battery Status, Power, Sync) |
| Housing | ABS |
| Dimensions | 2 x 1.7 x 0.6" / 52 x 42 x 16 mm |
| Weight | 1.2 oz / 35 g |
Transmitter
| Transmitter Type | Clip-On with Microphone |
| RF Output Power | Not Specified by Manufacturer |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Female Input |
| Included Cable Connector | 1/8" / 3.5 mm TRRS |
| Pad | None |
| Muting | Off/On Switch |
| Auto-Level Control | Yes |
| Signal Processing | None |
| Sync Method | Manual |
| Antenna | 1 x Internal |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable |
| Internal Battery Capacity | 400 mAh |
| Battery Charging Time | 2 Hours |
| Approx. Battery Life | 8 Hours |
| USB/Lightning I/O | 1 x USB-C (Audio, Charging) |
| Display & Indicators | 2 x LED (Battery Status, Power, Sync) |
| Housing | ABS |
| Dimensions | 2 x 1.7 x 0.6" / 52 x 42 x 16 mm |
| Weight | 1.2 oz / 35 g |
Microphone
| Microphone Type | Integrated |
| Color | Black |
| Sound Field | Mono |
| Capsule | Not Specified by Manufacturer |
| Polar Pattern | Omnidirectional |
| Frequency Range | 50 Hz to 20 kHz |
| Maximum SPL | 120 dB SPL |
| THD | None |
| Sensitivity | -40 dB |
| CMRR | None |
| Dynamic Range | None |
Microphone 2
| Microphone Type | Lavalier |
| Color | Black |
| Sound Field | Mono |
| Capsule | Electret Condenser |
| Polar Pattern | Omnidirectional |
| Frequency Range | 50 Hz to 20 kHz |
| Maximum SPL | 120 dB SPL |
| Sensitivity | -40 dB at 1 kHz |
| Outputs | 1 x 1/8" / 3.5 mm TRS Male |
Charging Case
| Recharge Time | 3.5 Hours |
| Capacity | 3400 mAh |
| Charging Interface | USB-C |
| Dimensions | 6.9 x 3.1 x 2.1" / 176 x 80 x 53 mm |
| Weight | 8 oz / 227 g |
Packaging Info
| Package Weight | 0.895 lb |
| Box Dimensions (LxWxH) | 7.4 x 4.1 x 2.5" |
In the Box
- Synco WAir-G1-A1-Pro Ultracompact Digital Wireless Microphone System for Cameras & Smartphones (2.4 GHz)
- Receiver
- Transmitter
- Charging Case
- Omnidirectional Lavalier
- USB-C Cable
- 3.5mm TRRS Cable
- 3.5mm TRS Cable
- Furry Windscreen
- USB-C to USB A Adapter
- 2-Year Manufacturer Warranty
No posts found
