bebob COCO-VENICE Overview
Use this B-Mount Adapter from bebob to power a Sony VENICE or VENICE 2 camera using a bebob B-mount battery and maintain hot-swapping capability. The mount supports failover between mains and battery power to maintain the safety of your equipment using the 4-pin XLR output cable and 3-pin input. The adapter mounts onto the camera's V-mount, and it supports a total 20A continuous draw and 12/24V unregulated output.
On the side of the plate are two Twist D-Tap outputs that support up to 14.4V/2.5A and two USB-A outputs that support 5V/1A. Around the adapter, there are also three 5-13V/1A Hirose outputs, three 12V/2A 2-pin LEMO-type outputs, and one 3-pin Fischer power output to power a variety of accessories.
bebob COCO-VENICE Specs
Key Specs
| Maximum Load | 20 A (Peak) |
| Power Output | D-Tap: 14 VDC at 2.5 A USB-A: 5 VDC at 1 A Hirose 4-Pin: 13 VDC at 1 A Hirose 4-Pin: 8.4 VDC at 1 A Hirose 4-Pin: 5 VDC at 1 A LEMO 2-Pin: 12 VDC at 2 A Fischer 3-Pin: 28.8 to 33.6 VDC XLR 4-Pin Male: 34 VDC |
| Plate Front / Battery Mount | B-Mount |
| Hot-Swap Support | Yes |
Power
| Power Input | B-Mount: 24 VDC |
| Maximum Load | 20 A (Peak) |
| Power Output | D-Tap: 14 VDC at 2.5 A USB-A: 5 VDC at 1 A Hirose 4-Pin: 13 VDC at 1 A Hirose 4-Pin: 8.4 VDC at 1 A Hirose 4-Pin: 5 VDC at 1 A LEMO 2-Pin: 12 VDC at 2 A Fischer 3-Pin: 28.8 to 33.6 VDC XLR 4-Pin Male: 34 VDC |
General
| Inputs/Outputs | 2x D-Tap 2x USB-A 3x Hirose 4-Pin 3x LEMO 2-Pin Female 1x XLR 3-Pin Female 1x XLR 4-Pin Male |
| Plate Front / Battery Mount | B-Mount |
| Plate Rear Mount | V-Mount Battery Plate |
| Number of Battery Bays | 1 |
| Hot-Swap Support | Yes |
| Material of Construction | Aluminum |
| Dimensions | 5.7 x 4.6 x 2.9" / 144 x 117 x 72.5 mm |
| Weight | 27.7 oz / 785 g |
In the Box
- bebob B-Mount Adapter for Sony VENICE 1 and 2
- 2-Year Manufacturer Warranty
No posts found
