Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro (V-Mount)
EAN: 606184860456
Add a professional, high-capacity battery plate to power your Blackmagic Pocket Cinema Camera 6K Pro rig with this compact Micro Battery Slide Pro from Wooden Camera. It supports one V-mount battery while leaving access to the camera s standard battery compartment, and it powers the camera using a 2-pin LEMO-type connector cable. With the camera s L-series battery in place, hot swapping is supported.
The battery slide mounts onto optional 15mm rods using its integrated 15mm LWS rod clamp. It also features two 5.8V D-Tap outputs for powering accessories. Each D-Tap accessory output features a digital fuse that monitors the D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.
Compatibility
Blackmagic Pocket Cinema Camera 6K Pro
V-mount battery
EAN: 606184860456
Add a professional, high-capacity battery plate to power your Blackmagic Pocket Cinema Camera 6K Pro rig with this compact Micro Battery Slide Pro from Wooden Camera. It supports one V-mount battery while leaving access to the camera s standard battery compartment, and it powers the camera using a 2-pin LEMO-type connector cable. With the camera s L-series battery in place, hot swapping is supported.
The battery slide mounts onto optional 15mm rods using its integrated 15mm LWS rod clamp. It also features two 5.8V D-Tap outputs for powering accessories. Each D-Tap accessory output features a digital fuse that monitors the D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.
Compatibility
Blackmagic Pocket Cinema Camera 6K Pro
V-mount battery
Wooden Camera A10023 Specs
Power
Power Output | D-Tap: VDC at 5.8 A |
General
Camera Power Method | Connector |
Inputs/Outputs | 1 x LEMO 2-Pin 2 x D-Tap |
Plate Front / Battery Mount | V-Mount |
Plate Rear Mount | 15 mm Rod Clamp |
Number of Battery Bays | 1 |
Hot-Swap Support | Yes |
Dimensions | 5.7 x 4.5 x 1.6" / 14.5 x 11.5 x 4 cm |
Weight | 11.1 oz / 315 g |
Packaging Info
Package Weight | 1.085 lb |
Box Dimensions (LxWxH) | 6.7 x 4.3 x 4.3" |
In the Box
- Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro (V-Mount)
- 2-Pin LEMO-Type Power Cable
- 2-Year Manufacturer Warranty
No posts found