Anton/Bauer TITON 90 Overview
Power your pro camera rig and accessories for a long shooting day with this 4 x Titon 90 Gold Mount Batteries and GM2 Charger Kit from Anton/Bauer. The kit includes four Titon 90 Gold mount lithium-ion batteries and a GM2 dual-bay Gold mount charger.
Each battery features a 92Wh capacity, a 14.2V output, up to 10A continuous draw with a 12.5A peak, and a digital LCD status gauge. They also feature one P-Tap and one USB-A accessory output. The charger can simultaneously charge two batteries, and it can also provide 15 VDC, 4A via the 4-pin XLR output at the same time.
Anton/Bauer presents this limited edition run kit, specially designed to celebrate five decades of creative partnership. This exclusive Special 50th Anniversary Edition embodies the commitment to excellence. Get your hands on a piece of history with this distinctive edition.
Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery
Providing a basic power readout and no user interactive surfaces, the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery can be used to power your Gold mount camera or other pro video gear. The lightweight lithium-ion chemistry can provide up to 10 amps of current on a continuous draw and support peaks of up to 12.5 amps for five seconds. At the side of the chassis, an LCD display screen shows battery capacity in percent remaining, and when put under load it shows the exact remaining runtime. Using the D-Tap and USB ports you can power essential accessories on your rig or other small electronics.
For those who prefer a basic battery without multiple display window options and mode selections. Additional information can be accessed and displayed via select Anton Bauer chargers (not included).
The built-in display shows remaining power as percent. When the battery is connected to a camera or light, or otherwise put under load the display changes to show the remaining runtime. This information is available in most professional camera EVFs.
The Titon Gold mount battery supports a continuous 10A total draw between the Gold mount, D-Tap, and USB ports. It will support a 12.5A draw for up to five seconds to accommodate the high-power draw (power inrush) of devices when they start up. The battery capacity is 92Wh.
The battery uses high-quality cells and robust electronics for power distribution and safety.
It has a working temperature range of -4 to 140° F, although temperatures below 40° F can greatly reduce battery performance.
The case is made from an ABS/polycarbonate blend.
The battery can be charged with Dual or Quad Gold mount LP and Performance chargers.
You can also use other Anton Bauer chargers, as well as common competitive chargers however, not all features and modes may be accessible with these other charges.
EAN: 872496009122
Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount)
This slim Gold mount Anton Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output allows you to simultaneously charge two Gold mount batteries (or a single battery) from 100 to 240 VAC sources, and it supports worldwide power of 50/60 Hz. The charger can also output 16.7 VDC through the 4-pin XLR while charging batteries, allowing you to power your camera and charge your batteries at the same time.
It features a top handle for easy transport and a built-in power management system that protects your batteries and powered devices from damage. The built-in intelligent safety technology continually monitors all attached devices, batteries as well as devices connected to the XLR port, and will shut down if a fault or overvoltage condition is detected, protecting your gear. A built-in fan helps to keep the unit cool and functioning. In addition, when AC power isn t available, you can connect one or two batteries to the charger, and it will output 15 VDC via the 4-pin XLR port.
Compatibility
LED charge status indicators
Supports worldwide power
IEC AC power input
Dedicated on/off switch
EAN: 872496009573
Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery Specs
| Mount / Series Type | Gold Mount |
| Chemistry | Lithium-Ion |
| Battery Capacity | 92 Wh |
| Output Voltage | 14.2 VDC |
| Maximum Load | 10 A 12.5 A (Peak) |
| Accessory I/O | 1x D-Tap / P-Tap Output 1x USB-A Output |
| USB Output | 5 V |
| Dimensions (W x H x D) | 3.9 x 5.16 x 2.28" / 9.9 x 13.1 x 5.8 cm |
| Weight | 1.76 lb / 0.8 kg |
In the Box
- 2-Year Manufacturer Warranty
- 4-Pin XLR Cable (10`)
- 2-Year Warranty
Customer reviews
Recommendation for purchase
