Anton/Bauer Go 90 2-Battery and Dual Charger Kit (V-Mount)

Anton/Bauer Go 90 Overview

Get your rig ready for a travel shoot with this Anton/Bauer Go 90 2-Battery and Dual Charger Kit put together. The kit includes two Go 90 V-mount batteries and a VM2 dual-bay V-mount travel charger.

The Go 90 lithium-ion batteries each feature a 98Wh capacity, support up to 8A continuous draw, and they have a slim design to fit on a small rig or gimbal. They each feature P-Tap and USB Type-A outputs to power cameras or accessories, and the 5-LED status gauge shows accurate battery capacity. The compact VM2 charger allows you to charge both batteries simultaneously, and it also features a 4-pin XLR output that provides up to 16.7 VDC output to power your camera while charging your batteries. It also features a built-in fan to keep the charger cool in warm environments.

Anton/Bauer Go 90 Battery (V-Mount)

The slim but powerful V-mount Anton/Bauer Go 90 Battery can be used to power your V-mount camera or other pro video gear. Though slim, and suitable for use when shooting handheld or on a gimbal, the battery has a 98Wh capacity and supports power draws up to a total of 8A.

It features a simple, intelligent, and easy-to-understand 5-LED battery gauge, with each LED block representing 10% battery capacity remaining. The LED gauge is activated with a tap of a button, and it turns off by itself to save power. The battery incorporates standard power output accessories including a P-tap, which is weather resistant, and a USB power output port. In addition to being weather resistant, the P-Tap can also be used to charge the battery with a compatible P-Tap charger.

This slim and lightweight battery has a capacity of 98Wh, to provide power to run your camera or device without sacrificing performance

The G0 90 battery supports continuous power draws up to 8A total across the V-mount and accessory power ports.

It has a working temperature range of 14 to 122° F, and the P-Tap port is weather resistant

You can charge the battery with an Anton/Bauer or third-party V-mount charger, as well as a compatible P-Tap charger (charger not included)

A 5-LED indicator power gauge displays the batteries remaining power in 20% increments

EAN: 872496009566

Anton/Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output (V-Mount)

This slim V-mount Anton Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output allows you to simultaneously charge two V-mount batteries (or a single battery) from 100 to 240 VAC sources, and it supports worldwide power of 50/60 Hz. The charger can also output 16.7 VDC through the 4-pin XLR while charging batteries, allowing you to power your camera and charge your batteries at the same time.

It features a top handle for easy transport and a built-in power management system that protects your batteries and powered devices from damage. The built-in intelligent safety technology continually monitors all attached devices, batteries as well as devices connected to the XLR port, and will shut down if a fault or overvoltage condition is detected, protecting your gear. A built-in fan helps to keep the unit cool and functioning. In addition, when AC power isn't available, you can connect one or two batteries to the charger, and it will output 15 VDC via the 4-pin XLR port.

Compatibility

LED charge status indicators

Supports worldwide power

IEC AC power input

Dedicated on/off switch

EAN: 872496009597