Anton/Bauer Titon Micro 90 Battery with Dual Charger & Sony FX6 Battery Slide Kit (V-Mount)

Provide long-lasting AC or DC power for your Sony FX6 camera and select accessories with this Anton Bauer Titon Micro 90 Battery with Dual Charger & Sony FX6 Battery Slide Kit put together Photo. This kit includes one V-mount Titon Micro 90 battery, the VM2 Dual-Bay charger, and a Micro Battery Slide Pro for the Sony FX6 camera.

The Titon Micro 90 V-mount battery features a 98Wh capacity, a 14V D-Tap output, a 5V USB output, a 10A maximum load, and an easy-to-read LCD status screen. The charger can charge up to two batteries simultaneously, and it can also output 16.7V to power a camera or accessory while charging. The battery slide pro is designed to mount a micro-sized V-mount battery onto your Sony FX6 while also allowing you to access the camera s BP-U battery for hot swapping.

Anton/Bauer Micro Battery Slide Pro for Sony FX6 (V-Mount)

Power your Sony FX6 via a V-mount battery with the Anton/Bauer Micro Battery Slide Pro, which steps up the output voltage of your V-mount battery to the 19.5 VDC required to power your camera via its DC input power port. The battery bracket supports standard- and micro-sized batteries, and it attaches directly to the extension unit connector on the top of your camera, which provides an anchor point for compact and secure connection of the plate to the camera without requiring you to mount it on support rods.

The attachment point also acts as a hinge for the plate, allowing you to access the camera s BPU battery slot, allowing you to hot-swap V-mount batteries, and change the V-mount or BPU battery without turning off the camera. Each of the two P-Tap connectors provides unregulated power output from your V-mount battery for powering accessories, and multiple 1/4" -20 mounting holes allow you to attach accessories directly to the plate.

The quick-hinge design retains access to the camera s internal BPU battery compartment, allowing continuous shooting by hot-swapping internal and external batteries

The Battery Slide Pro plate steps up the output of a 14.4V battery to the required 19.5 VDC to power your camera via its DC-in port

The lightweight plate is small in size, for a small footprint when mounted on your camera, but it supports both standard- and micro-sized V-mount batteries

Anton/Bauer Titon Micro 90 V-Mount Lithium-Ion Battery

Power your V-mount camera or other power-hungry pro video gear with the ultra-compact Anton Bauer Titon Micro 90 V-Mount Lithium-Ion Battery. This lightweight battery is smaller than the original Titon series models and features lithium-ion chemistry and a V-mount. It provides up to 10A continuous draw and has a 98Wh capacity.

At the side of the chassis, a five-stage LCD screen shows battery capacity in percent remaining, and when put under load, it shows the exact remaining runtime. Using the 14V D-Tap and 5V USB ports you can power essential accessories on your rig or other small electronics.

Using a separately available dual-battery Micro plate, you can boost your runtime and the batteries can be hot-swapped without needing to turn off your camera. You can also utilize a separately available, compact P-Tap charger since the P-Tap ports can also be used to charge the battery.

For those who prefer a basic battery without multiple display window options and mode selections. Additional information can be accessed and displayed via select Anton Bauer chargers (not included).

The built-in display shows the remaining power as percents. When the battery is connected to a camera or light, or otherwise put under load the display changes to show the remaining runtime. This information is available in most professional camera EVFs.

The Titon Micro V-mount battery supports a continuous 10A total draw between the V-mount, D-Tap, and USB ports. The battery capacity is 98Wh.

The battery uses high-quality cells and robust electronics for power distribution and safety.

It has a working temperature range of -4 to 140° F, although temperatures below 40° F can greatly reduce battery performance.

The case is made from an ABS/polycarbonate blend.

The battery can be charged with Dual or Quad V-mount LP and Performance chargers.

You can also use other Anton Bauer chargers, as well as common competitive chargers however, not all features and modes may be accessible with these other charges.

Anton/Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output (V-Mount)

This slim V-mount Anton Bauer VM2 Dual-Bay Charger with 4-Pin XLR Output allows you to simultaneously charge two V-mount batteries (or a single battery) from 100 to 240 VAC sources, and it supports worldwide power of 50/60 Hz. The charger can also output 16.7 VDC through the 4-pin XLR while charging batteries, allowing you to power your camera and charge your batteries at the same time.

It features a top handle for easy transport and a built-in power management system that protects your batteries and powered devices from damage. The built-in intelligent safety technology continually monitors all attached devices, batteries as well as devices connected to the XLR port, and will shut down if a fault or overvoltage condition is detected, protecting your gear. A built-in fan helps to keep the unit cool and functioning. In addition, when AC power isn t available, you can connect one or two batteries to the charger, and it will output 15 VDC via the 4-pin XLR port.

Compatibility

LED charge status indicators

Supports worldwide power

IEC AC power input

Dedicated on/off switch

EAN: 872496009597