Run your B-mount camera and pro video accessories from the B155CINE 14.4/28.8V 155Wh B-Mount Li-ion Battery from Bebob Factory GmbH. Robust and versatile, the B155CINE s B-mount interface enables powering B-mount devices, either 24 or 12V cameras or lights, with the correct voltage, which is determined by the device s B-mount plate.
The dual-voltage output is safe to use with your device, as the B-mount will not allow the higher voltage to flow to a device designed to handle 12/14.4 volts, nor will it allow you to underpower your 24V device. The battery features both a D-Tap and USB port for powering accessories. Designed to be strong, reliable, and versatile, this battery is built to withstand falls from 4.9 , while its modular design makes for easy repairs.
Sturdy and reliable B-mount interface.
Withstands falls from up to 4.9 , but if it does get damaged, its mechanical components are replaceable thanks to Bebob s modular design, allowing you to simply replace only the damaged mechanical components.
Another flexible feature is the Twist D-Tap port. Normally, you re limited to connecting a D-Tap cable only one way, but this rainproof socket allows you to plug a D-Tap connector into the battery with free choice of cable trailing from the left or right without reversing the output power polarity. The B155CINE also provides a 5V USB port for charging your mobile devices on location.
The B155CINE features lithium-ion trimix cells that offer a 20A maximum draw and a capacity of 155Wh. The 5-step LED status makes it easy to keep an eye on your battery s remaining power, so you know when it s time to recharge. Charging time is approximately four hours when using Bebob BS2/BS4 chargers.
bebob Dual B-Mount Battery Charger with 4-Pin XLR Output
Keep your B-mount batteries charged for a long shooting day with the portable Dual B-Mount Battery Charger with 4-Pin XLR Output from bebob. The charger provides simultaneous charging for two B-mount batteries with 16.8 VDC, 3A current to the batteries.
There is also a 4-pin XLR output for providing up to 16.5 VDC, 5A power to a camera or accessories. The charger can either be used in battery charging mode or XLR power output mode, but not simultaneously. This lightweight charger is designed with a built-in carry handle for easy transport.
Features
Charge up to two B-mount batteries simultaneously
Compatible with standard B-mount batteries from bebob, IDX, and Sony
4-pin XLR DC output for powering camera or accessories
Lightweight, portable design with integrated top-handle
16.8V, 3A charger output
16.5V, 5A XLR output
bebob B155CINE 14.4/28.8V 155Wh B-Mount Li-ion Battery Specs
| Mount / Series Type | B-Mount |
| Chemistry | Lithium-Ion |
| Battery Capacity | 5400 mAh / 155 Wh |
| Output Voltage | 28.8 VDC |
| Maximum Load | 20 A (Peak) |
| Accessory I/O | 1 x D-Tap Output |
| Maximum Load (Accessory I/O) | 3 A (D-Tap) |
| USB Output | 5 V, 1 A |
| Dimensions (W x H x D) | 5.7 x 3.7 x 2.3" / 144 x 94 x 58 mm |
| Weight | 2.2 lb / 1 kg |
Packaging Info
| Package Weight | 2.585 lb |
| Box Dimensions (LxWxH) | 7.4 x 4.4 x 3.4" |
bebob Dual B-Mount Battery Charger with 4-Pin XLR Output Specs
| Mount / Series Type | B-Mount |
| Number of Battery Bays | 2 |
| Output | XLR 4-Pin Female |
Electrical
| AC Input Power | 90 to 264 VAC, 50 / 60 Hz |
| Power Output | XLR 4-Pin: 16.5 to VDC at 5 A |
| Multi-Bay Charging Modes | Simultaneous |
| Chemistry | Lithium-Ion |
| Maximum Wattage | 100 W |
Environmental
| Operating Temperature | 14 to 95°F / -10 to 35°C |
General
| Indicator | LED |
| Dimensions | 9.1 x 5.6 x 4.3" / 23.1 x 14.1 x 11 cm |
| Weight | 2.2 lb / 1 kg |
Packaging Info
| Package Weight | 3.115 lb |
| Box Dimensions (LxWxH) | 9.7 x 8.3 x 5.5" |
In the Box
- 2-Year Manufacturer Warranty
- AC Power Cable
- 2-Year Manufacturer Warranty
No posts found
