BLUESHAPE Dual Charger with XLR Power Output and Two 193Wh Battery Kit (V-Mount)

Be ready to power your camera and other V-mount devices at home or on the road with the V-mount BLUESHAPE Dual Charger with XLR Power Output and Two 193Wh Battery Kit. This lightweight, compact, and portable power kit is well suited for the filmmaker on the go as the kit includes two Granite HDplus 14.4V batteries with 193Wh capacity each and a dual V-mount travel charger that supports a 6A draw for fast charging or can provide a 14.4 VDC output via its built-in XLR port. The batteries support a 13.4A total continuous draw over the V-mount connection and two D-Tap ports. Together, the charger and batteries provide you with a flexible power system for your shoot.

BLUESHAPE Dual V-Mount 6A Travel Charger with XLR Output

The Dual V-Mount 6A Travel Charger from BLUESHAPE allows you to charge two V-mount batteries sequentially and features a 4-pin XLR power output. It s very convenient to use, featuring a carry handle and a rotating foot on the bottom for desktop use. This updated model of the CVTR2 charger allows you to use the XLR output as a UPS backup with a quick failover function, and it features a higher 6A simultaneous charge. It is also fanless to ensure a quiet charge. Batteries under 190Wh take less than two hours to charge, while batteries up to 290Wh can take a bit over four hours to charge to 100%.

The charger features a pop-out stand that neatly tucks away underneath when not needed. It can be powered via an included AC cable or the separately available BLUESHAPE In-Car Adapter. A data socket allows for a USB connection with a separately available 4-pin LEMO to USB cable to a computer in order to monitor charging activity and log battery data. The optional BLUESHAPE BSCVMON cable and maintenance utility are required for this, and up to four chargers can be monitored on a single computer.

This charger features a BLUESHAPE technology called IPCS (Intelligent Pre-Charge System) that allows it to provide charge at increased speeds to batteries with fast-charge supporting features, such as pre-charge protection and cell-balancing. IPCS does this by initially boosting very low voltage cells to a state at which charge can be applied with a medium-low current without causing damage. Then it charges with a 300mA current for a while, and when the battery reaches a reasonable voltage state, the charger speeds up the charging process by switching to full throttle. To counteract the increased heat caused by this fast-charging capability, the charger employs another BLUESHAPE technology called CTP (Charger Thermal Protection) that allows the electronics to work out the best possible charge profiles without causing damage, even in adverse temperature conditions.

Key Features

• 4-pin XLR power port can be used as UPS backup
• Fanless design
• Charge two batteries simultaneously at 6A
• Carry handle and extending desktop foot
• DC port supports optional BLUESHAPE in-car adapter
• Features a 4-pin data socket supporting optional computer maintenance utility
• IPCS/CTP fast charge and overheat features
• LED status indicator
• On/Off switch

BLUESHAPE BV190 GRANITE HDplus 193Wh V-Mount Battery

BLUESHAPE s 193Wh GRANITE HDplus battery is designed for the rigors of a film or video set. The textured finish is easy to grab and is resistant to blemishes from drops and impacts. Both the interior and exterior have been tested to survive multiple vertical drops from up to 6 feet onto hard surfaces. The reinforced V-mount will accept a charge from most standard chargers, though a separately available BLUESHAPE V-mount charger is recommended.

Aside from being robust, the GRANITE HDplus batteries are also powerful. Power-hungry cameras and lights can draw up to 13.4 amps, between the main battery output and the two D-Taps on the sides. In addition to outputting 14.4 volts of power to charge external accessories, the left-side port supports independent overload protection, and the right-side D-Tap can also be used to charge the battery itself. The D-Tap ports output a combined maximum 5A of power. As an extra measure of protection, the D-Taps have rubber covers that help maintain the IP54 resistance rating against moisture and dust.

While the 5-LED battery meter is useful and convenient, BLUESHAPE also offers a free iOS/Android app that can monitor and control various aspects of the battery over Wi-Fi. The app updates in real-time based on current capacity, charging speed, and power draw. On set, all batteries can be monitored on the same network, so you know when to grab a fresh battery ahead of time.

Features

IP54 Protection

IP54 shockproof, moisture, and dust ingress-resistant construction for safe use, even in difficult environments.

Lightweight

With a compact size and lightweight, the external dimensions of the battery have been optimized for maximum capacity in the space available.

D-Tap Charging Ports

Dual D-Tap Outputs: The left-side port is overload-protected, the right-side port permits charging the battery. The D-Tap overload circuit runs independently from the main battery overload protection.

5-Step LED

A 5-step LED indicator provides accurate remaining capacity monitoring. Each LED accounts for 20% of state-of-charge when the capacity falls below 10%, the lower (first) LED blinks.

No Memory Effect

The battery has no memory effect and can be recharged at any time.

Standby Mode

The battery s energy is conserved during operation, stand-by, and low capacity states through an intelligent power mode management system. When the pack capacity is very low, it enters automatically into " shutdown mode" to minimize further capacity losses and prolong cell life. When the LED indicator is off, the pack can only be reactivated by charging.

Service

Advanced interior design permits easy servicing and restoration by qualified BLUESHAPE service personnel.

GRANITE Link

Wireless

GRANITE HDplus batteries are compatible with BLUESHAPE s GRANITE Link. A Wi-Fi communication feature allowing for remote, real-time status monitoring via an included iOS/Android mobile app. Using the GRANITE Link, you can check data such as State of Charge, Expected Time to Empty, Cell Temperature, Remaining Capacity, Full Charge Capacity, and Cycle Count. The state of charge and remaining runtime are updated in real time based on the actual load conditions.

Practical Use Cases

An operator, camera assistant, or technical director can easily monitor the state of the batteries in close proximity without having to physically press the button to check on the actual battery. Multiple batteries can be monitored simultaneously from a single device. Additional features through the app allow you to Identify, Lock, Unlock, and Connect to a different network.

Networking

Batteries can create their own Wi-Fi network for single battery monitoring, or can be connected to a master Wi-Fi network. A fleet of batteries can be easily monitored by multiple devices without complicated pairing procedures. Batteries can be given custom names for easy identification.

Construction

Internal Modular Design

The lithium-ion cells are secured inside the pack in a carefully designed and reinforced modular cage. All the metal interconnections and the electronic monitoring board are integrated with the cells making a single core. No otherwise vulnerable wiring is used. The metal cell-to-cell tabs have been thickened using a low-resistance alloy.

Solid External Construction

Robust thick-walled housing made of special plastic resin for impact resistance. The battery can withstand several drops from altitudes of up to 6 feet without breaking or suffering internal damage.