Core SWX Hotswap Plate Kit with 2 x 90Wh Batteries & Dual Charger (V-Mount)

Core SWX GPTS V-Mount Hot Swap Adapter

EAN: 184323000289

The Core SWX GPTS is a `hot swap` power adapter that mounts directly to your existing V-plate. Batteries are mounted side by side, so you can easily remove the depleted battery while leaving the other battery connected so there is never any down time. The GP-TS is outfitted with a 2-pin power port so that you are not limited to the cameras` own connector.

Dracast DR-CH2V Dual V-Mount Battery Charger

EAN: 610708234128

The portable DR-CH2V Dual V-Mount Battery Charger from Dracast allows you to simultaneously charge two V-Mount batteries (or a single battery) from 90 to 240 VAC sources. It features a top handle for easy transport and built-in capacity management system to ensure fast charging. The charger will automatically shutdown once the batteries reach their full charge. Additionally, the charger can function as a portable AC to DC power adapter, taking the AC power input and outputting 15 VDC at 4A via a 4-pin XLR connector. The output is only active when no batteries are attached.

Dracast 90Wh 14.8V Li-Ion V-Mount Battery

The Dracast 90Wh 14.8V Li-Ion V-Mount Battery is a memory-effect-free battery for professional camera systems. It features built-in electronics to protect the battery during charging and use, charger is not included with the battery. The 5-LED battery system provides an indicator that shows you how much capacity the battery has left before it needs to be charged. It incorporates a D-tap power outlet, so you can power accessories directly, instead of through your camera`s electronics. With an operating temperature range of -4 to 122° & F, the battery will keep working even in deep cold and extreme heat.

90Wh Li-ion professional mount battery pack does not suffer from memory effect, common to NiCd batteries.

Fits camera and lighting units with V-Mount battery bracket.

The built-in LED battery gauge provides you with a clear visual confirmation of the battery`s capacity.

The built-in D-tap connector allows you to power accessories directly from the battery, protecting your camera`s electronics from potential damage due to power hungry accessories.

The battery incorporates electronic protection from over-charging, over-discharging, over-current-draw, external short-circuits, and non-equilibrium between its power cells.

The battery will operate in temperature extremes that are uncomfortable for most people. Please note that as a general rule, battery capacity decreases as the temperature gets colder. Check your owner`s manual for instructions on charging cold or hot batteries.

An attached rubber cover protects the D-tap connector when not in use.