Core SWX Hypercore NEO 150 Mini 147Wh 4-Battery Kit with Quad Charger (V-Mount)

Core SWX NEO Mini Overview

Add four high-capacity compact batteries to your kit with this Core SWX Hypercore NEO 150 Mini 147Wh 4-Battery Kit with Quad Charger put together. The kit includes four Hypercore NEO 150 Mini 147Wh V-mount batteries and the Mach4 4A Rapid Quad Charger.

Each 14.8V Hypercore NEO 150 Mini lithium-ion battery features a constant 12A draw with a 16A peak draw, 147Wh capacity, RFID battery status compatible with VoltBridgeID, a backlit LCD screen, D-Tap and USB outputs, and a compact size that suits handheld rigs, gimbals, or drones. The Mach4 4A Quad Charger can fast-charge all four batteries simultaneously at 4A each, which allows the batteries to charge to full in about 1.5 hours. The charger also features red/green status LEDs, a durable aluminum enclosure, and a carry handle.

Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount)

The Hypercore NEO 150 Mini from Core SWX is a compact 14.8V, 147Wh lithium-ion battery that features a V-mount, and it supports a constant 12A draw with a peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications, as well as mobile and field applications. The battery is ultra-compact, so it s also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO 150 Mini has the ergonomic design, large backlit LCD, and protective overmolded rubberized housing that Hypercore batteries are known for over their past releases.

It s microprocessor-driven like previous Hypercores, ensuring safety and runtime delivery to camera viewfinders or LCDs, but, leveraging the microprocessor, the NEO 150 Mini features an RFID transmitter on the front that lets you monitor the stored battery data via Core SWX s VoltBridgeID iOS app or an RFID reader. The NEO 150 Mini has a more modular design consisting of less cabling, allowing for increased quality. With the cells and different parts installed separately and securely inside the housing, the chance of failure is reduced in case of drops, and servicing the battery becomes a simpler, more efficient process as the different parts install plug-and-play.

In addition to the large LCD, the Hypercore NEO 150 Mini has an LED gauge on the side to quickly spot battery level status. Other features include 2000 charge/discharge cycles, hibernation mode, and the ability to communicate to cameras as well as chargers with both one- and two-wire protocols (see the Features section below). The NEO 150 Mini also provides a SmartTap D-Tap port and a 5V USB port for powering/charging devices, and you can use the USB port to upgrade the battery s firmware. The SmartTap port lets you power any 12 VDC accessory and transmit battery data if the accessory is able to communicate that information.

Key Features

Compact and Powerful

The Hypercore NEO 150 Mini is a 14.8V, 147Wh lithium-ion battery supporting a 12A continuous draw and 16A peak draw.

Runtime LCD

A multipurpose backlit LCD provides nominal runtime based on a 25W load, remaining runtime once connected to a device, and remaining charge time when on a charger.

Camera Communication

The Hypercore NEO 150 Mini can communicate to cameras as well as chargers with both one- and two-wire protocols.

Hibernation

The packs go to sleep/hibernate when there is no battery usage or movement after a 48-hour period. Once the battery is picked back up, it awakens.

SmartTap Port

Integrated " smart" D-Tap connector allows users to power any 12 VDC device while also receiving all battery data from the port.

USB Port

The 5V USB port allows powering any USB accessory on the set as well as charge mobile devices.

Firmware Upgradeable

The NEO 150 Mini is firmware-upgradeable via its USB port.

Rubberized Housing

Overmolded, nonslip rubberized housing helps provide cell protection against accidental impacts.

Storage Mode

The Hypercore NEO 150 Mini incorporates Storage Mode to protect self-discharge and help comply with travel regulations.

EAN: 184323005178

Core SWX Mach4 4-Position Charger with 4A Rapid Charge (V-Mount)

Featuring four fast charge bays, this Mach4 4-Position Charger with 4A Rapid Charge is the next generation of smart chargers from Core SWX. The Mach4 is capable of charging four V-mount batteries with a fast 4A charge. It can charge four 98Wh batteries in approximately 1.5 hours at a rate of 4A per hour, which utilizes half the power used by previous models.

The charger is thinner than previous models at 3.15" thick and weighs only 5 lb, making it even more portable when you are shooting in the field. It features red and green status LEDs to indicate charging and full status. Supporting 90-240 VAC input voltage, the Mach4 is worldwide compatible, the housing is made from durable aluminum, and it can be carried using its recessed carry handle.

Key Features

Four independent charge bays

Simultaneous charging

Fast 4A charging

Approximately 90 minutes of charge time for four 98Wh batteries

Red and green status LEDs

90 to 240 VAC worldwide compatible input voltage

Aluminum enclosure

Recessed carry handle

EAN: 184323005970