IDX System Technology 4 x CUE-H180 Battery Kit with VL-4X Charger (V-Mount)

The V-mount IDX 4 x CUE-H180 Battery Kit with VL-4X Charger is to provide you with four high-capacity batteries and a flexible charging station. Each CUE-H180 V-mount battery features a 179Wh capacity and has a single D-Tap accessory port for powering accessories. It can support 12A loads, allowing you to power your camera or light while having plenty of power for accessories.

The VL-4X charger provides four battery bays for sequential charging. You can charge up to two batteries simultaneously when placed on opposite sides of the charger. Fold-down feet allow you to stand the charger upright, and although you cannot power a camera directly from the charger itself, the included AC power adapter outputs 90W and can be used to power a camera or the charger using the included 4-pin XLR cable.

IDX System Technology CUE-H180 179Wh Compact Li-Ion V-Mount Battery

Power your camera or other pro video equipment with the CUE-H180 179Wh Compact Li-Ion V-Mount Battery from IDX System Technology. The battery can supply up to 16.8 VDC to the plate, and it can also provide up to 80W to power accessories through the integrated D-Tap output. CUE-H180 batteries feature a nominal voltage of 14.8 VDC, a maximum output voltage of 16.8 VDC, and a maximum 12A draw.

CUE-H-series batteries feature an even higher capacity than their CUE-D predecessor while maintaining the same internal pack design that isolates it for reliability and safety. There is also built-in prevention of overcharging, overdischarging, or overcurrent. IDX CUE-H180 batteries should be charged using IDX-branded chargers third-party chargers may not charge CUE-H180 batteries correctly.

EAN: 825781013199

IDX System Technology VL-4X 4-Channel V-Mount Charger with Power Supply

The VL-4X 4-Channel V-Mount Charger with Power Supply from IDX supports lithium-ion V-mount batteries and features sequential charging for four batteries, automatically switching to the second battery after fully charging the first, and it features simultaneous charging for two batteries when on opposite sides. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design.

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. It features a support stand to keep the charger upright on a flat surface.

Note:

Power Base (DC output) mode is not supported with the VL-4X.

Charge four lithium-ion V-mount batteries sequentially, or two batteries simultaneously

Provides 2.7A quick-charge maximum

Overvoltage protection circuitry stops charging the batteries when voltage exceeds a safe charge level

Protection timer recovery charge mode is approximately two hours a quick charge timer is approximately 5 to 12 hours

4-pin XLR 100-240 VAC power adapter included

EAN: 825781013090