Pawa VM-150-T Overview
Power your camera, light, or any monitor requiring up to a 12A draw with this VM-150-T V-Mount Battery with D-Tap Charger from Pawa. Delivering 150Wh with 14.8V capacity, the unit boasts a built-in control circuit and has an integrated D-Tap port for powering your compatible device. A USB-A port facilitates the charging of your smartphone or tablet, and it can also be used to run additional accessories like recorders and wireless transmitters.
Approximately six hours of run time for loads of 25W are achieved thanks to the 150Wh capacity. A handy, built-in four-segment battery level indicator provides accurate remaining power readings, so you ll always know when it s time to pull out the included D-Tap charger and power cord to recharge your battery.
Power to Spare
Use the VM-150-T to power your video camera, lights, and accessories. You ll maximize the time before you need to change batteries.
Battery-Level Indicator
A four-LED indicator gives you a real-time readout of the battery level. You won t run out of power in the middle of a take because you ll always know when it s time to swap out your batteries.
D-Tap Input/Output Connector
A D-Tap port lets you power devices directly from the battery with 14.8V, 10A output. Connect lights, monitors, cameras, wireless video transmitters, and audio recorders without the added weight and hassle of extra batteries. When it s time to recharge, connect the included D-Tap charger.
USB Output
Don t leave the set or run to your car when you need to recharge your phone or tablet. Do it right from the USB-A port on the battery. The USB output provides 5V, 2A for convenient accessory charging.
V-Mount Connectivity
The secure V-mount locking system for the battery lets you move around, keep up with your talent, or put your camera on a slider. Get those crucial shots without worrying about dislodging the battery while you re working.
EAN: 847628055612
Pawa VM-150-T Specs
| Mount / Series Type | V-Mount |
| Chemistry | Lithium-Ion |
| Battery Capacity | 10,400 mAh / 150 Wh |
| Output Voltage | 14.8 VDC |
| Maximum Load | 12 A |
| Accessory I/O | 1x USB-A Output |
| USB Output | 5 V, 2 A |
| Charging Voltage | 5 VDC |
| Accessory Mounting Thread | No |
| Certifications | CE, WEEE, FCC |
| Environmental Protection | No |
| Dimensions (W x H x D) | 15.8 x 3.7 x 2.25" / 40.1 x 9.4 x 5.71 cm |
| Weight | 2.2 lb / 997 g |
In the Box
- Pawa VM-150-T V-Mount Battery with D-Tap Charger (150Wh)
- V-Mount Battery
- D-Tap Charger with Power Cord
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
