This kit pairs two Gold mount Watson Pro 14.4V 158Wh Slim Li-Ion Batteries with a single Watson Pro D-Tap Charger. Each battery features a robust 158Wh capacity, 12-amp maximum draw, and a D-Tap port. The portable charger connects to a single battery via its integrated D-Tap cable.
Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output
Conveniently charge any Watson Pro battery that has a D-Tap port with this Single-Position Li-Ion Battery Charger with a D-Tap Output from Watson Pro. Plug it into a 3-prong AC outlet and connect the D-Tap output to your battery. An LED indicator remains red while your battery is charging and switches to green when fully charged.
This is a 100-240V worldwide compatible charger, capable of being used internationally if you incorporate appropriate plug adapters, sold separately.
Approximate Charge Times
4.0Ah = 3.6 hours
4.4Ah = 4 hours
6.2Ah = 5.2 hours
6.6Ah = 5.5 hours
8.2Ah = 6.6 hours
8.8Ah = 7 hours
10.2Ah = 8 hours
11.0Ah = 9 hours
13.2Ah = 11 hours
EAN: 847628592421
Watson Pro 14.4V 158Wh Slim Li-Ion Battery (Gold Mount)
The Watson Pro 14.4V 158Wh Slim Li-Ion Battery, in a Gold mount, provides up to a 12A draw, enough to power the most demanding cameras, lights, and studio setups. It also features a 12V, 10A D-Tap output for powering monitors, transmitters, and other gear and accessories simultaneously with your main load.
The 158Wh capacity provides approximately 4 hours of runtime for a load of 35W. A 5-LED gauge on the side indicates remaining battery life at the press of a button below the LEDs. When capacity drops under 9%, the bottom LED automatically begins blinking as a warning. For safety, built-in intelligent circuitry shuts down the battery in case of high current, low voltage, extreme temperatures, or possible short circuits, protecting both your battery and gear.
All this is offered in a relatively slim design with ergonomic grips on the sides that allow for more comfortable handling. The AM-160-SE is rechargeable using any Watson Pro Gold mount charger.
Key Features
- 12A draw
- Slim design
- 158Wh capacity
- Approximate 4-hour runtime with a 35W load
- 12V, 10A D-Tap output with protective cover
- 5-LED gauge
- Blinking LED warning when capacity drops below 9%
- Built-in intelligent circuitry
- Ergonomic design
- Rechargeable via Watson Pro Gold mount chargers
- 10V end voltage
EAN: 847628012882
Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output Specs
| Output | D-Tap |
Electrical
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Output | D-Tap: 16.8 to VDC at 2 A |
| Chemistry | Lithium-Ion |
Environmental
| Operating Temperature | 14 to 95°F / -10 to 35°C |
General
| Dimensions | 2 x 2.75 x 5.5" / 5 x 7 x 14 cm |
| Weight | 1.1 lb / 480 g |
Packaging Info
| Package Weight | 1.3 lb |
| Box Dimensions (LxWxH) | 7.48 x 5.039 x 3.465" |
Watson Pro 14.4V 158Wh Slim Li-Ion Battery (Gold Mount) Specs
General
| Mount / Series Type | Gold Mount |
| Chemistry | Lithium-Ion |
| Battery Capacity | 11,000 mAh / 158 Wh |
| Output Voltage | 14.4 VDC |
| Maximum Load | 150 W, 12 A |
| Accessory I/O | 1 x D-Tap Output |
| Maximum Load (Accessory I/O) | 10 A (D-Tap) |
| Dimensions (W x H x D) | 6 x 3.7 x 2.2" / 15.24 x 9.4 x 5.59 cm |
| Weight | 2.5 lb / 1.13 kg |
Packaging Info
| Package Weight | 2.815 lb |
| Box Dimensions (LxWxH) | 7.55 x 4.8 x 3.45" |
In the Box
- Removable AC Power Cord
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
