This features four high-draw Watson Pro 14.4V 158Wh Slim Li-Ion Batteries, in a V-mount, and a portable Dual Position Charger. The lightweight ergonomic batteries support up to a 12A draw for powering up to the most power-hungry cameras. The charger provides simultaneous charging for batteries with up to 6.6Ah and sequential charging for batteries with higher amp-hour ratings. The charger also offers a 4-pin XLR DC power output and includes an XLR cable.
Watson Pro Dual Position Li-Ion Battery Charger (V-Mount)
This Watson Pro Dual Position Li-Ion Charger supports two V-mount batteries and offers a 4-pin XLR power output, providing dual-purpose functionality in a portable, handy design. It s capable of simultaneous charging, and the XLR port offers useful versatility. An ergonomic carry handle, flip-out kickstand, rubberized feet, On/Off switch, and LED status indicators complete the design and allow for comfortable and efficient operation.
This charger is able to charge two batteries with up to 6.6Ah capacities simultaneously, delivering 2.5A to each battery. For batteries with capacities of 8.8Ah or more, it provides sequential charging at 5A, first charging one to 85%, and then switching to fully charge both.
The 4-pin XLR power output can be used to power select cameras from an AC outlet or off of connected batteries. A special feature of this charger is that when it s connected to a power outlet, it is capable of charging the batteries and providing power through the XLR output at the same time, as opposed to one or the other as is more common.
Additionally, an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input, so it can be used worldwide with the right plug adapters (sold separately).
Key Features
- Supports two V-mount lithium-ion batteries
- 4-pin XLR DC power output
- Capable of sequential and simultaneous charging, depending on capacities
- Capable of charging batteries and providing power through the XLR output at the same time
- Ergonomic carry handle
- Flip-out kickstand
- Rubberized feet
- On/Off switch
- LED status indicators
- 100-240 VAC power input
- XLR cable included
XLR Power Output
- When connected to an AC outlet, delivers power at 16.7V and 4.5A
- When not connected to an outlet and with a battery/batteries attached, delivers 15V and 4.0A
Simultaneous/Sequential Charging
- Charges a single battery at 5A
- Delivers simultaneous charging at 2.5A per channel for batteries with up to 6.6Ah capacities
- Provides sequential charging at 5A for batteries with capacities of 8.8Ah or more
Approx. Charge Times
4.4Ah
Single: 2.5 hours
Dual: 2.5 hours simultaneously
6.6Ah
Single: 3.8 hours
Dual: 3.8 hours simultaneously
8.8Ah
Single: 2.5 hours
Dual: 5.0 hours sequentially
11Ah
Single: 3.2 hours
Dual: 6.5 hours sequentially
13.2Ah
Single: 3.8 hours
Dual: 7.6 hours sequentially
15.6Ah
Single: 4.2 hours
Dual: 8.5 hours sequentially
EAN: 847628592452
Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount)
The Watson Pro 14.4V 158Wh Slim Li-Ion Battery, in a V-mount, provides up to a 12A draw, enough to power the most demanding cameras, lights, and studio setups. It also features a 12V, 10A D-Tap output for powering monitors, transmitters, and other gear and accessories simultaneously with your main load.
The 158Wh capacity provides approximately 4 hours of runtime for a load of 35W. A 5-LED gauge on the side indicates remaining battery life at the press of a button below the LEDs. When capacity drops under 9%, the bottom LED automatically begins blinking as a warning. For safety, built-in intelligent circuitry shuts down the battery in case of high current, low voltage, extreme temperatures, or possible short circuits, protecting both your battery and gear.
All this is offered in a relatively slim design with ergonomic grips on the sides that allow for more comfortable handling. The VM-160-SE is rechargeable using any Watson Pro V-mount charger.
Key Features
- 12A draw
- Slim design
- 158Wh capacity
- Approximate 4-hour runtime with a 35W load
- 12V, 10A D-Tap output with protective cover
- 5-LED gauge
- Blinking LED warning when capacity drops below 9%
- Built-in intelligent circuitry
- Ergonomic design
- Rechargeable via Watson Pro V-mount chargers
- 10V end voltage
EAN: 847628012875
Watson Pro Dual Position Li-Ion Battery Charger (V-Mount) Specs
| Mount / Series Type | V-Mount |
| Number of Battery Bays | 2 |
| Output | XLR 4-Pin Female |
Electrical
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 1.5 A |
| Output Voltage | 16.7 VDC at 4.5 A (4-Pin XLR Female) |
| Multi-Bay Charging Modes | Simultaneous |
| Chemistry | Lithium-Ion |
| Maximum Wattage | 75 W |
Environmental
| Operating Temperature | 14 to 95°F / -10 to 35°C |
| Operating Humidity | 45 to 75% |
| Storage Temperature | -4 to 131°F / -20 to 55°C |
General
| Indicator | LED |
| Dimensions | 9.25 x 2.25 x 5.5" / 23.5 x 5.7 x 14 cm |
| Weight | 2.2 lb / 1 kg |
Packaging Info
| Package Weight | 4.065 lb |
| Box Dimensions (LxWxH) | 10.5 x 9.3 x 4.5" |
Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount) Specs
| Mount / Series Type | V-Mount |
| Chemistry | Lithium-Ion |
| Battery Capacity | 11,000 mAh / 158 Wh |
| Output Voltage | 14.4 VDC |
| Maximum Load | 150 W, 12 A |
| Accessory I/O | 1 x D-Tap Output |
| Maximum Load (Accessory I/O) | 10 A (D-Tap) |
| Dimensions (W x H x D) | 6 x 3.7 x 2.2" / 15.24 x 9.4 x 5.59 cm |
| Weight | 2.5 lb / 1.13 kg |
Packaging Info
| Package Weight | 2.78 lb |
| Box Dimensions (LxWxH) | 7.5 x 4.75 x 3.4" |
In the Box
- AC Power Cable
- 4-Pin XLR Cable
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
