Watson Pro Cine High-Load 2-Battery Kit with Dual Charger (V-Mount)

Watson Pro Cine HCS Overview

Add two long-lasting batteries to your video capture setup with the Watson Pro Cine High-Load 2-Battery Kit . This kit includes two 148Wh batteries and a dual V-mount charger. Each high-capacity V-mount battery can support up to a 15A continuous draw for powering cine-style cameras, accessories, LED lights, and external recorders. The portable dual charger features simultaneous charging and output via its 4-pin XLR port. Read more below about each item in this kit.

Watson Pro Cine High-Load V-Mount Battery

Power your cinema camera or other power-hungry professional equipment with this Watson Pro Cine V-Mount Battery. While sporting a capacity of 148Wh, this cine battery remains relatively compact. Its robust ABS housing fits on smaller cinema cameras without disrupting the overall design aesthetic or getting in the way of top-mounted accessories. The 15-amp maximum load on this Cine battery can support cinema cameras rigged up with accessories, large LED lights, external recorders, or other on-set essential gear that uses a V-mount. SMBUS communication is enabled through the V-mount connection. Accurate battery runtime remaining information can be displayed in the viewfinder of compatible cameras. Use the D-tap and USB port to power accessories and charge mobile devices as well. Intelligent circuitry protection is built-in to prevent overloading, overheating, and short-circuits.

Compact Design

Smaller cinema cameras benefit from the compact design of the Watson Pro Cine batteries. The shorter overall design sits in line with compact camera bodies, providing lower clearance for handles and complex rigs.

Accessory Ports

Not only will the Watson Pro Cine battery power your camera or light, accessories can be powered simultaneously using the built-in D-tap and USB ports. The D-tap can output 12V at up to 10 amps for lens control systems, on-camera lighting, or other accessory. The USB port outputs 5V at 1 amp and can be useful to charge on-set electronics or mobile devices.

LED Status Indicator

Press the check button on the rear and LEDs will illuminate to indicate the current battery capacity.

Intelligent Circuitry

Intelligent circuitry constantly analyzes battery load and temperature, and will shut down to prevent damage from overloading, overheating, and short-circuiting.

EAN: 847628002623

Watson Pro Dual Position Li-Ion Battery Charger (V-Mount)

This Watson Pro Dual Position Li-Ion Charger supports two V-mount batteries and offers a 4-pin XLR power output, providing dual-purpose functionality in a portable, handy design. It's capable of simultaneous charging, and the XLR port offers useful versatility. An ergonomic carry handle, flip-out kickstand, rubberized feet, On/Off switch, and LED status indicators complete the design and allow for comfortable and efficient operation.

This charger is able to charge two batteries with up to 6.6Ah capacities simultaneously, delivering 2.5A to each battery. For batteries with capacities of 8.8Ah or more, it provides sequential charging at 5A, first charging one to 85%, and then switching to fully charge both.

The 4-pin XLR power output can be used to power select cameras from an AC outlet or off of connected batteries. A special feature of this charger is that when it's connected to a power outlet, it is capable of charging the batteries and providing power through the XLR output at the same time, as opposed to one or the other as is more common.

Additionally, an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input, so it can be used worldwide with the right plug adapters (sold separately).

Key Features

• Supports two V-mount lithium-ion batteries
• 4-pin XLR DC power output
• Capable of sequential and simultaneous charging, depending on capacities
• Capable of charging batteries and providing power through the XLR output at the same time
• Ergonomic carry handle
• Flip-out kickstand
• Rubberized feet
• On/Off switch
• LED status indicators
• 100-240 VAC power input
• XLR cable included

XLR Power Output

• When connected to an AC outlet, delivers power at 16.7V and 4.5A
• When not connected to an outlet and with a battery/batteries attached, delivers 15V and 4.0A

Simultaneous/Sequential Charging

• Charges a single battery at 5A
• Delivers simultaneous charging at 2.5A per channel for batteries with up to 6.6Ah capacities
• Provides sequential charging at 5A for batteries with capacities of 8.8Ah or more

Approx. Charge Times

4.4Ah
Single: 2.5 hours
Dual: 2.5 hours simultaneously

6.6Ah
Single: 3.8 hours
Dual: 3.8 hours simultaneously

8.8Ah
Single: 2.5 hours
Dual: 5.0 hours sequentially

11Ah
Single: 3.2 hours
Dual: 6.5 hours sequentially

13.2Ah
Single: 3.8 hours
Dual: 7.6 hours sequentially

15.6Ah
Single: 4.2 hours
Dual: 8.5 hours sequentially

EAN: 847628592452