Neutrik NBNB75ILP9 BNC Cable Jack for Panel Mount (Isolated)
The Neutrik NBNB75ILP9 BNC Cable Jack for Panel Mount (Isolated) features a true 75 I© design for serial and digital (HD) signals. The machined brass connector body provides a highly rugged and non-abrasive connection for long-term use.
Gold-plated center contact
True 75 I© design meets stringent HD requirements
Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
Suitable Cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451
The Neutrik NBNB75ILP9 BNC Cable Jack for Panel Mount (Isolated) features a true 75 I© design for serial and digital (HD) signals. The machined brass connector body provides a highly rugged and non-abrasive connection for long-term use.
Gold-plated center contact
True 75 I© design meets stringent HD requirements
Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
Suitable Cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451
Neutrik NBNB75ILP9 Specs
| Connection Type | BNC 75 © |
| Gender | Male |
| Electrical | |
| Contact Resistance | ‰¤3 m © inner (inner) |
| Comment | ‰¤2 |
| Dielectric Strength | 1.5 KVDC |
| Impedance | 75 © |
| Insulation Resistance | >5 G © |
| Rated Voltage | 500 V |
| VSWR | ‰¤1.050 / >32 dB up to 1 GHz ‰¤1.065 / >30 dB up to 2 GHz ‰¤1.1 / >26 d |
| Mechanical | |
| Cable O.D. | 0.15 to 0.30" (4 to 7.7 mm) |
| Cable Retention | >30 N (center) |
| Crimp Mass | 6.47 Hex crimp (shield) according to IEC 60803 (die designation E) |
| Crimp Size | 1.6 Square crimp (pin) according to IEC 60803 (die designation 2) |
| Insertion Force | <25 N |
| Lifetime | >1,000 mating cycles |
| Locking Device | Bayonet |
| Mounting Direction | Rear |
| Chassis Shape | 0.5" (12.7 mm) |
| Cable | Anchoring: Jacket crimping |
| Material | |
| Contacts | Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact) |
| Insert | PTFE |
| Shell | Brass (CuZn39Pb3) |
| Shell Plating | Optalloy |
| Environmental | |
| Standard Compliance | IEC 6016908, MIL 348A |
| Temperature Range | -22 to 185°F (-30 to 85°C) |
| Contact | Crimpability: Complies with IEC 60803 and IEC 60352-2 |
| Dimensions | 0.630 x 1.32" (16 x 33.6 mm) |
Packaging Info
| Package Weight | 0.04 lb |
| Box Dimensions (LxWxH) | 4 x 2 x 1" |
In the Box
- Neutrik NBNB75ILP9 BNC Cable Jack for Panel Mount (Isolated)
- 6-Month Manufacturer Warranty
No posts found
