The CCRT242 TFS ClearCom Interface from Tactical Fiber Systems links the Blackmagic-Design ATEM Studio Converter 2 or a single camera converter system to a wired ClearCom party line system. It includes a patch cable with a 9-pin connector at one end, and one 1/4" plug and one 0.20" plug on the other. The cable connects to the headset / microphone inputs of either a studio converter (when used with multi-fiber links) or a camera converter (when used with single fiber links). A standard 3-pin XLR cable connects it to any standard ClearCom 3-pin XLR Base Station or Belt-Pak connector. It is powered by the ClearCom connection and does not require additional external power.
Note:
To null the interface, plug ear set into the 1/8" jack to the right of the interface and adjust the RLC trim pots for minimum noise. Then unplug the ear set. You must unplug the ear set after nulling the interface before using it.
Enables communication with your camera crew on both fiber and wired ClearCom party line systems using a single headset
EAN: 815915020940
Tactical Fiber Systems CCRT242 Specs
| Compatibility | ATEM Studio 2 |
| Connectors | 1 x 1/8" phone jack female, ear set connector 1 x 3-pin XLR, ClearCom connector 1 x 9-pin connector, interface |
| Cable Connector A | 1 x 9-pin connector |
| Cable Connector B | 1 x 1/4" phone jack 1 x 0.2" phone jack |
| Dimensions | 6 x 4 x 2" (15.2 x 10.2 x 5.1 cm) |
| Weight | 1 lb (0.45 kg) |
Packaging Info
| Package Weight | 3 lb |
| Box Dimensions (LxWxH) | 8 x 6 x 3" |
In the Box
- Tactical Fiber Systems CCRT242 TFS ClearCom Interface for ATEM Studio 2
- 9-Pin to 1 x 1/4" and 1 x 0.20" ClearCom Interface Patch Cable
- 2-Year Manufacturer Warranty
No posts found
