The WVT-1 Transmitter Set from ARRI includes the transmitter, two mounting options, and three cables for powering the unit from an ARRI or third-party camera. The WVT-1 provides real-time, uncompressed wireless transmission for ARRI or third-party cameras up to approximately 2000 with under 1 ms of delay. Pair the WVT-1 with up to four ARRI WVR-1 receivers, or with the Transvideo Starlite ARRI-WFS monitor. Dual-channel audio, timecode, and a REC flag function are included in the 128-bit AES–encrypted signal. The WVT-1 s 10-bit output is compatible with HDR monitoring.
Designed for daily use on professional sets, this bundle includes cables for powering the transmitter from ARRI cameras and BeBob splitter boxes, or from a 3-pin Fischer-type or D-tap-equipped third-party camera. The robust WVT-1 Transmitter has an input voltage enabling it to be used with a wide range of batteries. With an inclusive operating temperature of -4 to 113° F, the ARRI wireless video system is suitable for a variety of locations.
The WVT-1 Transmitter features a water-resistant and dust-proof aluminum housing with collared antenna and cable ports for increased durability. This set includes both L-bracket and 3/8 -16 threaded mounting options. A short BNC cable (1 ), and a USB cable are also included in this WVT-1 set.
Features
Up to 2000 uncompressed, real-time transmission with under 1 ms delay
Set includes cables for powering from an ARRI camera or splitter box, or from a 3-pin Fischer-type or D-tap-equipped third-party camera
Transmitter mounts to the included L-Bracket or 3/8 -16 adapter
Capable of multicasting to four WVR-1 receivers or the Transvideo Starlite ARRI-WFS monitor
128-bit AES-encrypted signal with embedded 2-channel audio, timecode, and a REC flag function
10-bit output is compatible with HDR monitoring
Rugged water-resistant, dustproof housing with 3/8 -16 threaded adapter
Input voltage of 10.5 to 34V is compatible with a wide range of batteries
Collared antenna and cable ports for added durability
ARRI Wireless Video System Case
The ARRI Case for the Wireless Video System is designed to hold a complete set of components. Store and transport one WVT-1 Transmitter, up to four WVR-1 Receivers, corresponding cables, and accessories.
ARRI WV-1 Wireless Video Transmitter Set Specs
| Material of Construction | Aluminum |
| Frequency Band | 5 GHz |
| Transmission Range | 1970` (600 m) |
| Video Output | 10-bit |
| Input Voltage Range | 10.5 to 34 V |
| Operating Temperature Range | -4 to 113°F (-20 to 45°C) |
| Dimensions and Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 2.38 lb |
| Box Dimensions (LxWxH) | 14.5 x 11.8 x 2.7" |
ARRI Wireless Video System Case Specs
General
| Dimensions and Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 21.04 lb |
| Box Dimensions (LxWxH) | 24.9 x 20.3 x 13.4" |
In the Box
- 2 x ARRI Wireless Video / WiFi / ECS Antenna
- ARRI 3/8" Thread Adapter for ARRI Wireless Tx or Rx
- ARRI 2-Pin LEMO-Type to 3-Pin Fischer Cable (19")
- ARRI Cable RS - RS/Power In (1.6`)
- ARRI UMC-4 RS IN to D-Tap Power Source Cable (1.6`)
- ARRI L-Bracket for Select Electronic Control Systems
- ARRI WVS USB Cable for Software Updates
- ARRI HDTV BNC Cable (12")
- 2-Year Manufacturer Warranty
- ARRI Wireless Video Receiver WVR-1 Device
- 5 x ARRI Wireless Video / WiFi / ECS Antenna
- ARRI MIA-1 Multi-Interface Adapter for ARRI Wireless Tx or Rx
- ARRI RPS-1 Receiver Power Supply
- ARRI WVS USB Cable for Software Updates
- ARRI Wireless Video Receiver small WVR-1s Device
- ARRI WVS USB Micro Cable
- ARRI 3/8" Thread Adapter for ARRI Wireless Tx or Rx
No posts found
