Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Crystal Video Technology BeamLink-Quad 1080p Wireless Video System with 4 x TX and 1 x RX
Wirelessly transmit four SDI video sources to a single receiver for video switching using this BeamLink-Quad 1080p Wireless Video System from Crystal Video Technology. The system includes four transmitters and one receiver that allows you to simultaneously send four HDMI or 3G-SDI 1080p video signals to the receiver over a range up to 656 .
Each transmitter features one HDMI and one 3G-SDI input, four long-range antennas, and a bright OLED display. The receiver features four antennas, four HDMI outputs, and four 3G-SDI outputs for sending the signals to a separately available video switcher, monitor, or other destinations. Signals up to 1080p60 can be transmitted with a latency of less than 70 ms over one wireless signal. The system uses beamforming to prevent interference for a strong, lossless video signal. The receiver also features a video encoder and can be configured to stream video via RJ45 Ethernet or Wi-Fi using the RTSP protocol to a computer, switch, or for monitoring on mobile devices. The system can also be remotely controlled using standard RS-232 or RS-422 serial protocols, and it supports the tally I/O function.
Each transmitter is designed with an L-series battery plate on the rear and the receiver comes with an integrated V-mount plate, and each unit features a V-lock adapter mount. The entire set can also be powered continuously using the included power adapter for the receiver, and two cables are supplied for powering the transmitters using compatible batteries.
Key Features
Four transmitters with one 3G-SDI input and one HDMI input
Receiver with four 3G-SDI and four HDMI outputs
Up to 1080p60 video transmission
656 line-of-sight transmission range
Low 70 ms latency
5.1 to 5.8 GHz frequency
Tally input/output
Integrated L-series battery plate on transmitters and V-mount battery plate on receiver
V-lock adapter mounts on each unit
Includes receiver power adapter and transmitter power cables
OLED status display
Supports IP streaming (RSTP)
RS-232 data transmission
Easy setup
Wirelessly transmit four SDI video sources to a single receiver for video switching using this BeamLink-Quad 1080p Wireless Video System from Crystal Video Technology. The system includes four transmitters and one receiver that allows you to simultaneously send four HDMI or 3G-SDI 1080p video signals to the receiver over a range up to 656 .
Each transmitter features one HDMI and one 3G-SDI input, four long-range antennas, and a bright OLED display. The receiver features four antennas, four HDMI outputs, and four 3G-SDI outputs for sending the signals to a separately available video switcher, monitor, or other destinations. Signals up to 1080p60 can be transmitted with a latency of less than 70 ms over one wireless signal. The system uses beamforming to prevent interference for a strong, lossless video signal. The receiver also features a video encoder and can be configured to stream video via RJ45 Ethernet or Wi-Fi using the RTSP protocol to a computer, switch, or for monitoring on mobile devices. The system can also be remotely controlled using standard RS-232 or RS-422 serial protocols, and it supports the tally I/O function.
Each transmitter is designed with an L-series battery plate on the rear and the receiver comes with an integrated V-mount plate, and each unit features a V-lock adapter mount. The entire set can also be powered continuously using the included power adapter for the receiver, and two cables are supplied for powering the transmitters using compatible batteries.
Key Features
Four transmitters with one 3G-SDI input and one HDMI input
Receiver with four 3G-SDI and four HDMI outputs
Up to 1080p60 video transmission
656 line-of-sight transmission range
Low 70 ms latency
5.1 to 5.8 GHz frequency
Tally input/output
Integrated L-series battery plate on transmitters and V-mount battery plate on receiver
V-lock adapter mounts on each unit
Includes receiver power adapter and transmitter power cables
OLED status display
Supports IP streaming (RSTP)
RS-232 data transmission
Easy setup
Crystal Video Technology Beamlink-Quad Specs
Inputs / Outputs
| Antenna I/O | Transmitter: 4 x RP-SMA Female Receiver: 4 x RP-SMA Female |
| Video I/O | Transmitter: 1 x BNC (3G-SDI) Input Transmitter: 1 x HDMI 1.4 Input Receiver: 4 x BNC (3G-SDI) Output Receiver: 4 x HDMI 1.4 Output |
| Embedded Audio | SDI: 2-Channel HDMI: 2-Channel |
| Audio I/O | None |
| Power | Transmitter: 1 x Coax (17 VDC) Input Receiver: 1 x XLR 4-Pin (17 VDC) Input |
| Other I/O | Receiver: 1 x DE-9/DB-9 (RS-232/RS-422) Input/Output Transmitter: 2 x Proprietary (Tally) Input/Output Receiver: 1 x RJ45 (LAN) Input/Output |
| Encryption | WPA2, WPS |
Wireless
| Wireless Range | 656.2` / 200 m (Line-of-Sight) |
| Channel Bandwidth | 40 MHz |
| Frequency Range | US: 5.1 to 5.8 GHz |
| Latency | < 70 ms |
| RF Power | 17 dBm |
| RF Sensitivity | -70 dBm |
| Wi-Fi | Wi-Fi 4 (802.11n) |
| Bluetooth | None |
Format Support
| Video Format | HDMI/SDI 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 |
| Audio Format | 2-Channel LPCM Audio |
| Wireless Video Compression | Compressed |
| Timecode Support | No |
Power
| DC Input Power | 7 to 17 VDC at 2 A |
| Battery Type | Receiver: 1 x V-Mount Transmitter: 1 x L-Series |
| Power Consumption | Transmitter: 10 W Receiver: 20 W |
Mounting
| Mounting | 1 x V-Lock |
Environmental
| Environmental Protection | None |
| Operating Temperature | 14 to 122°F / -10 to 50°C |
| Storage Temperature | -40 to 176°F / -40 to 80°C |
General
| Dimensions | Transmitter: 5 x 3.7 x 1.5" / 126 x 94 x 39 mm Receiver: 7.8 x 5.5 x 2" / 199 x 139 x 52 mm |
In the Box
- Crystal Video Technology BeamLink-Quad 1080p Wireless Video System with 4 x TX and 1 x RX
- 4 x Transmitter
- Receiver
- 16 x Transmitter Antenna
- 4 x Receiver Antenna
- 4 x Double Screw Connector
- 5 x RS-232 Cable
- 4 x Power Cable for Transmitter
- Power Adapter for Receiver
- Metal Stand for Receiver
- 2-Year Manufacturer Warranty
No posts found
