Nimbus WiMi5150A Wireless Transmission System with WiMi1000 Repeater Bundle

Wirelessly transmit high-quality HD video up to 1080p60 up to 4921` away using a 5 GHz Wi-Fi signal with this WiMi5150A Wireless Transmission System Bundle from Nimbus. The bundle includes one WiMi5150A HDMI H.264 encoder transmitter, a WiMi5150A decoder/receiver, and a WiMi1000 wireless AP repeater.

The transmitter can encode and send HDMI video to the receiver simultaneously with virtually zero latency. The WiMi1000 repeater can extend the wireless signal by up to 4000`, so the total distance covered is up to 9000`. Each unit features an L-series battery plate, a DCA12M DC power adapter, a 1/4"-20 mounting thread, and three adjustable RP-SMA antennas.

Nimbus WiMi5150A Wireless HDMI H.264 Decoder/Receiver

The WiMi5150A Wireless HDMI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi5150A transmitter as a point-to-point Wi-Fi transmission system with a 4921` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.

The receiver accepts up to a 1080p60 HDMI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video. Up to three receivers can be paired to a single transmitter for multicasting over the same range and with the same near-zero delay.

The WiMi5150A receiver features a single HDMI output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate as well as a power adapter. Batteries are sold separately.

Key Features

• 4921` range over 5 GHz Wi-Fi
• 30ms latency
• Up to 1080p60 and UXGA VESA HDMI resolutions
• Up to three units can be paired with a single transmitter, sold separately, for simultaneous multicasting
• Decodes H.264 file received from the transmitter and outputs it as video
• Baseline profile with level 4.2
• L-series battery plate and power adapter included
• 1/4"-20 mounting thread

EAN: 653559999167

Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Transmitter

The WiMi5150A Wireless HDMI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5150A receiver as a point-to-point Wi-Fi transmission system with a 4921` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.

The transmitter encodes and sends up to a 1080p60 HDMI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video. The transmitter is also capable of multicasting to up to three receivers at the same time over the same range and with the same near-zero delay.

The WiMi5150A transmitter features a single HDMI input. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector. Batteries and power adapters are sold separately.

Key Features

• 4921` range over 5 GHz Wi-Fi
• 30ms latency
• Encodes and sends up to a 1080p60 HDMI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
• Up to UXGA VESA resolutions also supported
• Multicasting to up to three WiMi5150A receivers
• Baseline profile with level 4.2
• USB firmware update port
• L-series battery plate included
• 2-pin LEMO power input
• 1/4"-20 mounting thread

EAN: 193913000028

Nimbus WiMi1000 Wireless AP Repeater for WiMi5150A, WiMi5200, WiMi5200A & WiMi6220 Wireless Systems

Compatible with select Nimbus wireless transmission systems, the Nimbus WiMi1000 Wireless AP Repeater allows you to extend the wireless distance between the transmitter and receiver by 4000` with 1 ms latency. It lets you do this even when something is blocking the line of sight, as long as both units have a line-of-sight view of the repeater.

A common application is using the repeater to go around corners. For example, if you place the repeater on a corner of a building, and both your transmitter and receiver are on different sides of that building, as long as each one has a line of sight of the repeater, the repeater will connect them and increase transmission distance by 4000`. A 5000` system, for example, can be extended to 9000`. It works the same way in fields, tunnels, and various other settings.

The repeater comes with an L-series battery plate as well as a power supply. Simply mount it on the corner or other location via its 1/4"-20 mounting thread, power it on, and set its DIP switches to match the DIP switch settings of the transmitter/receiver set. The repeater is compatible with the Nimbus WiMi5150A, WiMi5200, WiMi5200A, and WiMi6220 wireless transmission systems.

Key Features

• Extends the wireless distance between the transmitter and receiver by 4000`
• 1 ms latency
• Enables going around corners when line of sight is broken
• DIP switch setup
• L-series battery plate and power supply included

EAN: 193913000080