Nimbus WiMi5200 Wireless Transmission System Bundle

Wirelessly transmit high-quality HD video up to 1080p60 up to 1968` away using a 5 GHz Wi-Fi signal with this WiMi5200A Wireless Transmission System Bundle from Nimbus. The bundle includes one WiMi5200 3G-SDI H.264 encoder transmitter and two WiMi5200 3G-SDI decoder/receivers.

The transmitter can encode and send 3G/HD/SD-SDI video to both receivers simultaneously with virtually zero latency. Each unit features an L-series battery plate, a DCA12M DC power adapter, a 1/4"-20 mounting thread, and three adjustable RP-SMA antennas.

Nimbus WiMi5200 Wireless 3G-SDI H.264 Encoder/Transmitter

The WiMi5200 Wireless 3G-SDI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5200 receiver as a point-to-point Wi-Fi transmission system with a 1968` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.

The WiMi5200 transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector for continuous power. Batteries and power adapters are sold separately.

Key Features

• 1968` range over 5 GHz Wi-Fi
• 30ms latency
• Encodes and sends up to a 1080p60 SDI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
• 3G/HD/SD-SDI input and loop output
• Baseline profile with level 4.2
• DIP switch selection of Wi-Fi frequency and encoding rate
• USB firmware update port
• 1/4"-20 mounting thread
• L-series battery plate included
• 2-pin LEMO power input

EAN: 193913000042

Nimbus WiMi5200 Wireless 3G-SDI H.264 Decoder/Receiver

The WiMi5200 Wireless 3G-SDI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi5200 transmitter as a point-to-point Wi-Fi transmission system with a 1968` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The receiver accepts up to a 1080p60 SDI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video.

The WiMi5200 receiver features a single 3G/HD/SD-SDI output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate as well as a power adapter. Batteries are sold separately.

Key Features

• 1968` range over 5 GHz Wi-Fi
• 30ms latency
• Up to 1080p60 SDI resolution
• Decodes H.264 file received from the transmitter and outputs it as video
• Single 3G/HD/SD-SDI output
• Baseline profile with level 4.2
• L-series battery plate and power adapter included
• 1/4"-20 mounting thread