Nimbus WiMi5200 Overview
The WiMi5200A Wireless 3G-SDI H.264 Encoder/Decoder Set from Nimbus is a point-to-point Wi-Fi transmission system with a 4921' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.
The transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output, and the receiver has a single 3G/HD/SD-SDI output. The set includes one L-series battery plate for the transmitter and one power adapter for the receiver, although both units support continuous power via 2-pin LEMO inputs. Both units offer a 1/4"-20 mounting thread on the bottom.
Key Features
- 4921' range over 5 GHz Wi-Fi
- 30ms latency
- Up to 1080p60 SDI resolution
- H.264 (MPEG-4 Parts 10: AVC) encoding/decoding
- Transmitter: 3G/HD/SD-SDI input and loop output
- Receiver: 3G/HD/SD-SDI output
- Baseline profile with level 4.2
- DIP switch selection of Wi-Fi frequency and encoding rate
- 1/4"-20 mounting threads
Nimbus WiMi5200 Specs
Wireless
| Wireless Range | 4921.26' / 1500 m (Line-of-Sight) |
| # of Channels | 12 (40 MHz) |
| Latency | 30 ms |
| Wi-Fi | 5 GHz Wi-Fi 4 (802.11n) |
Interfaces
| Transmitter Video Connectors | 1x BNC (3G-SDI / HD-SDI / SD-SDI) Input 1x BNC (3G-SDI / HD-SDI / SD-SDI) Loop Output |
| Receiver Video Connectors | 1x BNC (3G-SDI / HD-SDI / SD-SDI) Output |
| Embedded Audio | SDI |
Format Support
| Video Format | SDI/BNC: 1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 1080PsF at 25, 29.97, 30 fps SDI/BNC: 1080i at 50, 59.94, 60 fps SDI/BNC: 720p at 50, 59.94, 60 fps SDI/BNC: 576i at 50 fps SDI/BNC: 480i at 59.94 fps |
| Video Standard Compliance | SMPTE 274M/296M |
Power
| Transmitter Battery Support | 1x Sony L-Series / NP-F Type |
| Transmitter Power I/O | 1x LEMO 2-Pin Input |
| Receiver Power I/O | 1x LEMO 2-Pin Input |
General
| Transmitter Mounting | 1x 1/4"-20 Female |
| Receiver Mounting | 1x 1/4"-20 Female |
| Transmitter Dimensions | 4.65 x 2.68 x 0.98" / 11.8 x 6.8 x 2.5 cm |
| Receiver Dimensions | 4.65 x 2.68 x 0.98" / 11.8 x 6.8 x 2.5 cm |
| Transmitter Weight | 0.6 lb / 260 g |
| Receiver Weight | 0.6 lb / 260 g |
In the Box
- Nimbus WiMi5200A Wireless 3G-SDI H.264 Encoder/Decoder Set
- WiMi5200A Transmitter
- WiMi5200A Receiver
- 3 x 6 dBi Bar Antenna for Transmitter
- 3 x 6 dBi Bar Antenna for Receiver
- Sony L-Series Battery Plate
- 2-Year Manufacturer Warranty
No posts found
