Wirelessly transmit high-quality HD video up to 1080p60 up to 4921` away using a 5 GHz Wi-Fi signal with this WiMi5200A Wireless Transmission System Bundle from Nimbus. The bundle includes one WiMi5200A 3G-SDI H.264 encoder transmitter, one WiMi5200A decoder/receiver, and a WiMi1000 wireless AP repeater.
The transmitter can encode and send 3G/HD/SD-SDI video to the receiver simultaneously with virtually zero latency. The WiMi1000 repeater can extend the wireless signal by up to 4000`, so the total distance covered is up to 9000`. Each unit features an L-series battery plate, a DCA12M DC power adapter, a 1/4"-20 mounting thread, and three adjustable RP-SMA antennas.
Nimbus WiMi5200A Wireless 3G-SDI H.264 Encoder/Transmitter
The WiMi5200A Wireless 3G-SDI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5200A receiver as a point-to-point Wi-Fi transmission system with a 4921` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.
The WiMi5200A transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector for continuous power. Batteries and power adapters are sold separately.
Key Features
- 4921` range over 5 GHz Wi-Fi
- 30ms latency
- Encodes and sends up to a 1080p60 SDI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
- 3G/HD/SD-SDI input and loop output
- Baseline profile with level 4.2
- DIP switch selection of Wi-Fi frequency and encoding rate
- USB firmware update port
- 1/4"-20 mounting thread
- L-series battery plate included
- 2-pin LEMO power input
Nimbus WiMi5200A Wireless 3G-SDI H.264 Decoder/Receiver
The WiMi5200A Wireless 3G-SDI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi5200A transmitter as a point-to-point Wi-Fi transmission system with a 4921` range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The receiver accepts up to a 1080p60 SDI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video.
The WiMi5200A receiver features a single 3G/HD/SD-SDI output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate as well as a power adapter. Batteries are sold separately.
Key Features
- 4921` range over 5 GHz Wi-Fi
- 30ms latency
- Up to 1080p60 SDI resolution
- Decodes H.264 file received from the transmitter and outputs it as video
- Single 3G/HD/SD-SDI output
- Baseline profile with level 4.2
- L-series battery plate and power adapter included
- 1/4"-20 mounting thread
Nimbus WiMi1000 Wireless AP Repeater for WiMi5150A, WiMi5200, WiMi5200A & WiMi6220 Wireless Systems
Compatible with select Nimbus wireless transmission systems, the Nimbus WiMi1000 Wireless AP Repeater allows you to extend the wireless distance between the transmitter and receiver by 4000` with 1 ms latency. It lets you do this even when something is blocking the line of sight, as long as both units have a line-of-sight view of the repeater.
A common application is using the repeater to go around corners. For example, if you place the repeater on a corner of a building, and both your transmitter and receiver are on different sides of that building, as long as each one has a line of sight of the repeater, the repeater will connect them and increase transmission distance by 4000`. A 5000` system, for example, can be extended to 9000`. It works the same way in fields, tunnels, and various other settings.
The repeater comes with an L-series battery plate as well as a power supply. Simply mount it on the corner or other location via its 1/4"-20 mounting thread, power it on, and set its DIP switches to match the DIP switch settings of the transmitter/receiver set. The repeater is compatible with the Nimbus WiMi5150A, WiMi5200, WiMi5200A, and WiMi6220 wireless transmission systems.
Key Features
- Extends the wireless distance between the transmitter and receiver by 4000`
- 1 ms latency
- Enables going around corners when line of sight is broken
- DIP switch setup
- L-series battery plate and power supply included
EAN: 193913000080
Nimbus WiMi5200A Wireless 3G-SDI H.264 Encoder/Transmitter Specs
Wireless
Wireless Range | 4921.26` / 1500 m (Line-of-Sight) |
# of Channels | 12 (40 MHz) |
Latency | ‰¤ 30 ms |
Format Support
Embedded Audio | SDI |
Video Standard Compliance | SMPTE 274M/296M |
Nimbus WiMi5200A Wireless 3G-SDI H.264 Decoder/Receiver Specs
Embedded Audio | SDI |
Wireless
Wireless Range | 4921.26` / 1500 m (Line-of-Sight) |
# of Channels | 12 (40 MHz) |
Latency | ‰¤ 30 ms |
Format Support
Video Standard Compliance | SMPTE 274M/296M |
Nimbus WiMi1000 Wireless AP Repeater for WiMi5150A, WiMi5200, WiMi5200A & WiMi6220 Wireless Systems Specs
Power Input | 2-Pin LEMO |
Latency | 1 ms |
Mount Type | 1/4"-20 Female |
Packaging Info
Package Weight | 1.89 lb |
Box Dimensions (LxWxH) | 14 x 9 x 3.3" |
In the Box
- 3 x 6 dBi Bar Antenna
- Sony L-Series Battery Plate
- 2-Year Manufacturer Warranty
- 3 x 6 dBi Bar Antenna
- Sony L-Series Battery Plate
- Nimbus DCA12M Mini 12 VDC Adapter for WiMi6220, WiMi5150A, and WiMi5200
- 2-Year Manufacturer Warranty
- 3 x 6 dBi Bar Antenna
- L-Series Battery Plate
- Nimbus DCA12M Mini 12 VDC Adapter for WiMi6220, WiMi5150A, and WiMi5200
- 2-Year Manufacturer Warranty
No posts found