Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver
EAN: 653559999143
The WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi6220 transmitter as a point-to-point Wi-Fi transmission system with a 4921 range and only 80ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.
The receiver accepts up to a 1080p60 SDI or HDMI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video. Up to four receivers can be paired to a single transmitter for multicasting over the same range and with the same near-zero delay.
Alternatively, an Ethernet port, which allows for CCU/PTZ camera control, can also be used for wired connectivity and 1080p60 transmission, though only at maximum distances allowed by twisted pair cabling. In addition to the 3G/HD/SD-SDI output, HDMI output, and Ethernet port, the WiMi6220 receiver features an RS-422 interface and a two-way talk-back audio jack. With a corresponding audio jack available on the transmitter, the talk-back port allows connecting a headset mic for communication with talent.
The WiMi6220 receiver offers a 1/4 -20 mounting thread on the bottom and comes with a V-mount battery plate and a power adapter. Batteries are sold separately.
Key Features
EAN: 653559999143
The WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi6220 transmitter as a point-to-point Wi-Fi transmission system with a 4921 range and only 80ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.
The receiver accepts up to a 1080p60 SDI or HDMI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video. Up to four receivers can be paired to a single transmitter for multicasting over the same range and with the same near-zero delay.
Alternatively, an Ethernet port, which allows for CCU/PTZ camera control, can also be used for wired connectivity and 1080p60 transmission, though only at maximum distances allowed by twisted pair cabling. In addition to the 3G/HD/SD-SDI output, HDMI output, and Ethernet port, the WiMi6220 receiver features an RS-422 interface and a two-way talk-back audio jack. With a corresponding audio jack available on the transmitter, the talk-back port allows connecting a headset mic for communication with talent.
The WiMi6220 receiver offers a 1/4 -20 mounting thread on the bottom and comes with a V-mount battery plate and a power adapter. Batteries are sold separately.
Key Features
- 4921 range over 5 GHz Wi-Fi
- 80ms latency
- Up to 1080p60 SDI and HDMI resolutions
- Decodes H.264 file received from the transmitter and outputs it as video
- RTSP streaming server (RTP/UDP)
- MPEG2TS streaming (UDP)
- Relay streaming server (RTSP/MPEG2TS)
- Up to four units can be paired with a single transmitter, sold separately, for simultaneous multicasting
- 3G/HD/SD-SDI and HDMI outputs
- Ethernet port for CCU/PTZ control or wired connectivity and 1080p60 transmission
- Two-way talk-back audio jack for headset mic communication
- RS-422 interface
- Baseline profile with level 4.2
- V-mount battery plate and power adapter included
- USB firmware update port
- 1/4 -20 mounting thread
Nimbus WiMi6220 Specs
| Embedded Audio | SDI HDMI |
Wireless
| Wireless Range | 4921.26` / 1500 m (Line-of-Sight) |
| # of Channels | 12 (40 MHz) 24 (20 MHz) |
| Frequency Range | 5.15 to 5.25 GHz 5.25 to 5.35 GHz 5.47 to 5.72 GHz 5.72 to 5.85 GHz |
| Latency | ≤ 80 ms |
Format Support
| Video Standard Compliance | SMPTE 259M/274M/292M/296M/425M ITU -R BT.601 |
| Audio Format | 16-Bit 48 kHz LPCM Audio |
In the Box
- Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver
- 3 x 6 dBi Bar Antenna
- RJ45 Adapter for RS-422
- V-Mount Battery Plate
- 2-Year Manufacturer Warranty
No posts found
